[PATCH] [SCSI] libsas: add missing newline when printing 'enable' by sysfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When I cat sysfs file 'enable' below 'sas_phy', it displays as follows.
It's better to add a newline for easy reading.

[root@localhost ~]# cat /sys/devices/pci0000:00/0000:00:0d.0/0000:0f:00.0/host3/phy-3:2/sas_phy/phy-3:2/enable
1[root@localhost ~]#

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@xxxxxxxxxx>
---
 drivers/scsi/scsi_transport_sas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 182fd25..e443dee 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -563,7 +563,7 @@ static ssize_t do_sas_phy_enable(struct device *dev,
 {
 	struct sas_phy *phy = transport_class_to_phy(dev);
 
-	return snprintf(buf, 20, "%d", phy->enabled);
+	return snprintf(buf, 20, "%d\n", phy->enabled);
 }
 
 static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, show_sas_phy_enable,
-- 
1.7.12.4




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux