This patch series adds support for inline encryption to UFS using the inline encryption support in the block layer. It follows the JEDEC UFSHCI v2.1 specification, which defines inline encryption for UFS. This patch series previously went through a number of iterations as part of the "Inline Encryption Support" patchset (last version was v13: https://lkml.kernel.org/r/20200514003727.69001-1-satyat@xxxxxxxxxx). This patch series is rebased on v5.8-rc4. Patch 1 introduces the crypto registers and struct definitions defined in the UFSHCI v2.1 spec. Patch 2 introduces functions to manipulate the UFS inline encryption hardware (again in line with the UFSHCI v2.1 spec) via the block layer keyslot manager. Device specific drivers must set the UFSHCD_CAP_CRYPTO in hba->caps before ufshcd_hba_init_crypto is called to opt-in to inline encryption support. Patch 3 wires up ufshcd.c with the UFS crypto API introduced in Patch 2. This patch series has been tested on some Qualcomm chipsets (on the db845c, sm8150-mtp and sm8250-mtp) using some additional patches at https://lkml.kernel.org/linux-scsi/20200501045111.665881-1-ebiggers@xxxxxxxxxx/ and on some Mediatek chipsets using the additional patch in https://lkml.kernel.org/linux-scsi/20200304022101.14165-1-stanley.chu@xxxxxxxxxxxx/. These additional patches are required because these chipsets need certain additional behaviour not specified within the UFSHCI v2.1 spec. Thanks a lot to all the folks who tested this out! Changes v3 => v4: - fix incorrect patch folding - some cleanups from Eric Changes v2 => v3: - introduce ufshcd_prepare_req_desc_hdr_crypto to clean up code slightly - split up ufshcd_hba_init_crypto into ufshcd_hba_init_crypto_capabilities and ufshcd_init_crypto. The first function is called from ufshcd_hba_capabilities, and only reads crypto capabilities from device registers and sets up appropriate crypto structures. The second function is called from ufshcd_init, and actually initializes the inline crypto hardware. Changes v1 => v2 - handle OCS_DEVICE_FATAL_ERROR explicitly in ufshcd_transfer_rsp_status Satya Tangirala (3): scsi: ufs: UFS driver v2.1 spec crypto additions scsi: ufs: UFS crypto API scsi: ufs: Add inline encryption support to UFS drivers/scsi/ufs/Kconfig | 9 ++ drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/ufshcd-crypto.c | 238 +++++++++++++++++++++++++++++++ drivers/scsi/ufs/ufshcd-crypto.h | 77 ++++++++++ drivers/scsi/ufs/ufshcd.c | 49 ++++++- drivers/scsi/ufs/ufshcd.h | 24 ++++ drivers/scsi/ufs/ufshci.h | 67 ++++++++- 7 files changed, 456 insertions(+), 9 deletions(-) create mode 100644 drivers/scsi/ufs/ufshcd-crypto.c create mode 100644 drivers/scsi/ufs/ufshcd-crypto.h -- 2.27.0.212.ge8ba1cc988-goog
