Mike, Thanks for the review!
The pr_err Detected NON_EXISTENT_LUN is the error messages issued
for the TCM_NON_EXISTENT_LUN retcode so I believe they are the same.
Simply scanning for the wrong lun on an initiator will generate this
error on the target but not generate an error on the initiator. And I
have seen installs, with a lot of initiators, automate the scanning of
such luns incorrectly deemed missing.
While this looks like a simple problem it can take days to get
access or the tcp traces to sort it out.
Within the same routine there is another pr_err for
TCM_WRITE_PROTECTED that I did not add the initiatorname to as I
thought this would leave a heavy footprint on the initiator. If you
believe this should be changed for consistency please let me know and
I will add this and change to nacl->initiatorname.
On Sat, May 16, 2020 at 9:50 AM Mike Christie <mchristi@xxxxxxxxxx> wrote:
>
> On 5/13/20 11:01 PM, Lance Digby wrote:
> > The NON_EXISTENT_LUN error can be written without an error condition
> > on the initiator responsible. Adding the initiatorname to this message
> > will reduce the effort required to fix this when many initiators are
> > supported by a target.
> >
> > Signed-off-by: Lance Digby <lance.digby@xxxxxxxxx>
> > ---
> > drivers/target/target_core_device.c | 5 +++--
> > 1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
> > index 4cee113..604dea0 100644
> > --- a/drivers/target/target_core_device.c
> > +++ b/drivers/target/target_core_device.c
> > @@ -100,9 +100,10 @@
> > */
> > if (unpacked_lun != 0) {
> > pr_err("TARGET_CORE[%s]: Detected NON_EXISTENT_LUN"
> > - " Access for 0x%08llx\n",
> > + " Access for 0x%08llx from %s\n",
> > se_cmd->se_tfo->fabric_name,
> > - unpacked_lun);
> > + unpacked_lun,
> > + se_sess->se_node_acl->initiatorname);
>
> You can do nacl->initiatorname.
>
> Do you also want add the name to the tmr case? It's probably not common,
> but the error message would be consistent.
>
> > return TCM_NON_EXISTENT_LUN;
> > }
> >
>
