----- Original Message ----- From: v.dubeiko@xxxxxxxxx To: linux-scsi@xxxxxxxxxxxxxxx Cc: hmadhani@xxxxxxxxxxx, jejb@xxxxxxxxxxxxx, martin.petersen@xxxxxxxxxx, linux@xxxxxxxxx, r.bolshakov@xxxxxxxxx, slava@xxxxxxxxxxx Sent: Friday, April 24, 2020 7:10:49 AM GMT -06:00 US/Canada Central Subject: [PATCH 3/3] scsi: qla2xxx: Fix issue with fake adapter's stopping state From: Viacheslav Dubeyko <v.dubeiko@xxxxxxxxx> Date: Wed, 22 Apr 2020 13:55:52 +0300 Subject: [PATCH 3/3] scsi: qla2xxx: Fix issue with fake adapter's stopping state The sequence of command reveals the fake adapter's stopping state: echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod modprobe tcm_qla2xxx mkdir /sys/kernel/config/target/qla2xxx mkdir /sys/kernel/config/target/qla2xxx/<port-name> mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable The goal of this commands sequence is to restart the adapter. However, it is possible to see that flag tgt_stop remains indicating that the adapter is still stopping even after the enabling it. kernel: PID 1396:qla_target.c:1555 qlt_stop_phase1(): tgt_stop 0x0, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-e803:1: PID 1396:qla_target.c:1567: Stopping target for host 1(c0000000033557e8) kernel: PID 1396:qla_target.c:1579 qlt_stop_phase1(): tgt_stop 0x1, tgt_stopped 0x0 kernel: PID 1396:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-e801:1: PID 1396:qla_target.c:1316: Scheduling sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 <skipped> kernel: qla2xxx [0001:00:02.0]-290a:1: PID 340:qla_target.c:1187: qlt_unreg_sess sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 <skipped> kernel: qla2xxx [0001:00:02.0]-f801:1: PID 340:qla_target.c:1145: Unregistration of sess c00000002d5cd800 21:00:00:24:ff:7f:35:c7 finished fcp_cnt 0 kernel: PID 340:qla_target.c:1155 qlt_free_session_done(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled. <skipped> kernel: qla2xxx [0001:00:02.0]-28f1:1: PID 346:qla_os.c:3956: Mark all dev lost kernel: PID 346:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end. <skipped> kernel: PID 1396:qla_target.c:6812 qlt_enable_vha(): tgt_stop 0x1, tgt_stopped 0x0 <skipped> kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled. <skipped> kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end. Finally, qlt_handle_cmd_for_atio() method rejects the requests to send commands because of treating the adapter in the stopping state. kernel: PID 0:qla_target.c:4442 qlt_handle_cmd_for_atio(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-3861:1: PID 0:qla_target.c:4447: New command while device c000000005314600 is shutting down kernel: qla2xxx [0001:00:02.0]-e85f:1: PID 0:qla_target.c:5728: qla_target: Unable to send command to target This patch adds the calling as qlt_stop_phase1() as qlt_stop_phase2() in tcm_qla2xxx_tpg_enable_store() and tcm_qla2xxx_npiv_tpg_enable_store() methods. The qlt_stop_phase1() marks adapter as stopping (tgt_stop == 0x1, tgt_stopped == 0x0) but qlt_stop_phase2() marks adapter as stopped (tgt_stop == 0x0, tgt_stopped == 0x1). Signed-off-by: Viacheslav Dubeyko <v.dubeiko@xxxxxxxxx> Reviewed-by: Roman Bolshakov <r.bolshakov@xxxxxxxxx> diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 1f0a185b2a95..bf00ae16b487 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -949,6 +949,7 @@ static ssize_t tcm_qla2xxx_tpg_enable_store(struct config_item *item, atomic_set(&tpg->lport_tpg_enabled, 0); qlt_stop_phase1(vha->vha_tgt.qla_tgt); + qlt_stop_phase2(vha->vha_tgt.qla_tgt); } return count; @@ -1111,6 +1112,7 @@ static ssize_t tcm_qla2xxx_npiv_tpg_enable_store(struct config_item *item, atomic_set(&tpg->lport_tpg_enabled, 0); qlt_stop_phase1(vha->vha_tgt.qla_tgt); + qlt_stop_phase2(vha->vha_tgt.qla_tgt); } return count; -- 2.17.1 Looks good. Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx> -- Himanshu Madhani Oracle Linux Engineering
