Hi,
I failed to find where do you initialize the phyprofile_completion, did I miss something?
[DU] We will initalize phyprofile_completion in this patch itself.
Thanks,
Deepak
> From: Viswas G <Viswas.G@xxxxxxxxxxxxx>
>
> Added the support to get the phy profile which gives information about
> the phy states, port and errors on phy.
>
> Signed-off-by: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
> Signed-off-by: Viswas G <Viswas.G@xxxxxxxxxxxxx>
> Signed-off-by: Radha Ramachandran <radha@xxxxxxxxxx>
Hi,
I failed to find where do you initialize the phyprofile_completion, did I miss something?
Thanks!
Jinpu
> ---
> drivers/scsi/pm8001/pm8001_ctl.h | 27 +++++++++++++
> drivers/scsi/pm8001/pm8001_init.c | 1 +
> drivers/scsi/pm8001/pm8001_sas.c | 1 +
> drivers/scsi/pm8001/pm8001_sas.h | 5 +++
> drivers/scsi/pm8001/pm80xx_hwi.c | 82
> ++++++++++++++++++++++++++++++++++++++-
> drivers/scsi/pm8001/pm80xx_hwi.h | 2 +
> 6 files changed, 116 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_ctl.h
> b/drivers/scsi/pm8001/pm8001_ctl.h
> index d0d43a250b9e..5a1cbd54164c 100644
> --- a/drivers/scsi/pm8001/pm8001_ctl.h
> +++ b/drivers/scsi/pm8001/pm8001_ctl.h
> @@ -41,6 +41,33 @@
> #ifndef PM8001_CTL_H_INCLUDED
> #define PM8001_CTL_H_INCLUDED
>
> +struct phy_profile {
> + char phy_id;
> + unsigned int phy_state:4;
> + unsigned int nlr:4;
> + unsigned int plr:4;
> + unsigned int reserved1:12;
> + unsigned char port_id;
> + unsigned int prts:4;
> + unsigned int reserved2:20;
> +} __packed;
> +
> +struct phy_errcnt {
> + unsigned int InvalidDword;
> + unsigned int runningDisparityError;
> + unsigned int codeViolation;
> + unsigned int LossOfSyncDW;
> + unsigned int phyResetProblem;
> + unsigned int inboundCRCError;
> +};
> +
> +struct phy_prof_resp {
> + union {
> + struct phy_profile status;
> + struct phy_errcnt errcnt;
> + } phy;
> +};
> +
> #define IOCTL_BUF_SIZE 4096
> #define HEADER_LEN 28
> #define SIZE_OFFSET 16
> diff --git a/drivers/scsi/pm8001/pm8001_init.c
> b/drivers/scsi/pm8001/pm8001_init.c
> index a8f5344fdfda..68005d0cb33d 100644
> --- a/drivers/scsi/pm8001/pm8001_init.c
> +++ b/drivers/scsi/pm8001/pm8001_init.c
> @@ -502,6 +502,7 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
> else
> pm8001_ha->iomb_size = IOMB_SIZE_SPC;
>
> + pm8001_ha->phyprofile_completion = NULL;
> #ifdef PM8001_USE_TASKLET
> /* Tasklet for non msi-x interrupt handler */
> if ((!pdev->msix_cap || !pci_msi_enabled()) diff --git
> a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
> index b7cbc312843e..3a69d8d1d52e 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.c
> +++ b/drivers/scsi/pm8001/pm8001_sas.c
> @@ -283,6 +283,7 @@ int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
> * is empirically about all it takes) */
> if (time < HZ)
> return 0;
> +
> /* Wait for discovery to finish */
> sas_drain_work(ha);
> return 1;
> diff --git a/drivers/scsi/pm8001/pm8001_sas.h
> b/drivers/scsi/pm8001/pm8001_sas.h
> index ae7ba9b3c4bc..cba4e9b95c58 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.h
> +++ b/drivers/scsi/pm8001/pm8001_sas.h
> @@ -56,6 +56,7 @@
> #include <scsi/sas_ata.h>
> #include <linux/atomic.h>
> #include "pm8001_defs.h"
> +#include "pm8001_ctl.h"
>
> #define DRV_NAME "pm80xx"
> #define DRV_VERSION "0.1.39"
> @@ -244,6 +245,8 @@ struct pm8001_dispatch {
> int (*sas_diag_execute_req)(struct pm8001_hba_info *pm8001_ha,
> u32 state);
> int (*sas_re_init_req)(struct pm8001_hba_info *pm8001_ha);
> + int (*get_phy_profile_req)(struct pm8001_hba_info *pm8001_ha,
> + int phy, int page);
> };
>
> struct pm8001_chip_info {
> @@ -561,6 +564,8 @@ struct pm8001_hba_info {
> u32 reset_in_progress;
> u32 non_fatal_count;
> u32 non_fatal_read_length;
> + struct completion *phyprofile_completion;
> + struct phy_prof_resp phy_profile_resp;
> };
>
> struct pm8001_work {
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c
> b/drivers/scsi/pm8001/pm80xx_hwi.c
> index 4d205ebaee87..0f4f18b0e480 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> @@ -3792,7 +3792,6 @@ static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
> PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
> status, err_qlfr_pgcd));
> -
> return 0;
> }
>
> @@ -3818,9 +3817,59 @@ static int
> mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha, static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
> void *piomb)
> {
> + u32 tag, page_code;
> + struct phy_profile *phy_profile, *phy_prof;
> + struct phy_errcnt *phy_err, *phy_err_cnt;
> + struct get_phy_profile_resp *pPayload =
> + (struct get_phy_profile_resp *)(piomb + 4);
> + u32 status = le32_to_cpu(pPayload->status);
> +
> + page_code = (u8)((pPayload->ppc_phyid & 0xFF00) >> 8);
> +
> PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" pm80xx_addition_functionality\n"));
> + pm8001_printk(" pm80xx_addition_functionality\n"));
> + if (status) {
> + /* status is FAILED */
> + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> + "mpiGetPhyProfileReq failed with status 0x%08x\n",
> + status));
> + }
>
> + tag = le32_to_cpu(pPayload->tag);
> + if (pm8001_ha->phyprofile_completion != NULL) {
> + if (status) {
> + /* signal fail status */
> + memset(&pm8001_ha->phy_profile_resp, 0xff,
> + sizeof(pm8001_ha->phy_profile_resp));
> + } else if (page_code == SAS_PHY_GENERAL_STATUS_PAGE) {
> + phy_profile =
> + (struct phy_profile *)&pm8001_ha->phy_profile_resp;
> + phy_prof =
> + (struct phy_profile *)pPayload->ppc_specific_rsp;
> + phy_profile->phy_id = le32_to_cpu(phy_prof->phy_id);
> + phy_profile->phy_state =
> + le32_to_cpu(phy_prof->phy_state);
> + phy_profile->plr = le32_to_cpu(phy_prof->plr);
> + phy_profile->nlr = le32_to_cpu(phy_prof->nlr);
> + phy_profile->port_id = le32_to_cpu(phy_prof->port_id);
> + phy_profile->prts = le32_to_cpu(phy_prof->prts);
> + } else if (page_code == SAS_PHY_ERR_COUNTERS_PAGE) {
> + phy_err =
> + (struct phy_errcnt *)&pm8001_ha->phy_profile_resp;
> + phy_err_cnt =
> + (struct phy_errcnt *)pPayload->ppc_specific_rsp;
> + phy_err->InvalidDword =
> + le32_to_cpu(phy_err_cnt->InvalidDword);
> + phy_err->runningDisparityError =
> + le32_to_cpu(phy_err_cnt->runningDisparityError);
> + phy_err->LossOfSyncDW =
> + le32_to_cpu(phy_err_cnt->LossOfSyncDW);
> + phy_err->phyResetProblem =
> + le32_to_cpu(phy_err_cnt->phyResetProblem);
> + }
> + complete(pm8001_ha->phyprofile_completion);
> + }
> + pm8001_tag_free(pm8001_ha, tag);
> return 0;
> }
>
> @@ -5013,6 +5062,34 @@ pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
> return IRQ_HANDLED;
> }
>
> +int pm8001_chip_get_phy_profile(struct pm8001_hba_info *pm8001_ha,
> + int phy_id, int page_code) {
> +
> + u32 tag;
> + struct get_phy_profile_req payload;
> + struct inbound_queue_table *circularQ;
> + int rc, ppc_phyid;
> + u32 opc = OPC_INB_GET_PHY_PROFILE;
> +
> + memset(&payload, 0, sizeof(payload));
> +
> + rc = pm8001_tag_alloc(pm8001_ha, &tag);
> + if (rc)
> + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Invalid
> + tag\n"));
> +
> + circularQ = &pm8001_ha->inbnd_q_tbl[0];
> +
> + payload.tag = cpu_to_le32(tag);
> + ppc_phyid = (page_code & 0xFF) << 8 | (phy_id & 0xFF);
> + payload.ppc_phyid = cpu_to_le32(ppc_phyid);
> +
> + pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
> + sizeof(payload), 0);
> +
> + return rc;
> +}
> +
> void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
> u32 operation, u32 phyid, u32 length, u32 *buf) { @@ -5113,4
> +5190,5 @@ const struct pm8001_dispatch pm8001_80xx_dispatch = {
> .set_nvmd_req = pm8001_chip_set_nvmd_req,
> .fw_flash_update_req = pm8001_chip_fw_flash_update_req,
> .set_dev_state_req = pm8001_chip_set_dev_state_req,
> + .get_phy_profile_req = pm8001_chip_get_phy_profile,
> };
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h
> b/drivers/scsi/pm8001/pm80xx_hwi.h
> index 701951a0f715..b5119c5479da 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.h
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.h
> @@ -175,7 +175,9 @@
> #define PHY_STOP_ERR_DEVICE_ATTACHED 0x1046
>
> /* phy_profile */
> +#define SAS_PHY_ERR_COUNTERS_PAGE 0x01
> #define SAS_PHY_ANALOG_SETTINGS_PAGE 0x04
> +#define SAS_PHY_GENERAL_STATUS_PAGE 0x05
> #define PHY_DWORD_LENGTH 0xC
>
> /* Thermal related */
> --
> 2.16.3
>
