[Bug 206123] aacraid ( PM8068) and iommu=nobypass Frozen PHB error on ppc64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugzilla.kernel.org/show_bug.cgi?id=206123

Oliver O'Halloran (oohall@xxxxxxxxx) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |oohall@xxxxxxxxx

--- Comment #4 from Oliver O'Halloran (oohall@xxxxxxxxx) ---
(In reply to Timothy Pearson from comment #3)
> If I'm decoding this right, the EEH is caused by a PCIe configuration space
> write, triggering a correctable error in the PCIe core.  I have no way of
> knowing if the address reported is valid (I suspect it is not) but would be
> 0x0.

$ pest 8300b03800000000 8000000000000000
Transaction type: DMA Read Response
Invalid MMIO Address
TCE Page Fault
TCE Access Fault
LEM Bit Number 56
Requestor 00:0.0
MSI Data 0x0000
Fault Address = 0x0000000000000000

A TCE fault makes more sense given that it doesn't happen when bypass is
enabled. I'm leaning towards this being a driver bug, but it could be a powerpc
IOMMU specific issue. I'll investigate.

-- 
You are receiving this mail because:
You are watching the assignee of the bug.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux