[PATCH AUTOSEL 5.6 121/149] scsi: qla2xxx: Return appropriate failure through BSG Interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Michael Hernandez <mhernandez@xxxxxxxxxxx>

[ Upstream commit 1b81e7f3019d632a707e07927e946ffbbc102910 ]

This patch ensures flash updates API calls return possible failure
status through BSG interface to the application.

Link: https://lore.kernel.org/r/20200226224022.24518-7-hmadhani@xxxxxxxxxxx
Signed-off-by: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
Signed-off-by: Michael Hernandez <mhernandez@xxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_bsg.c |  9 +++++++--
 drivers/scsi/qla2xxx/qla_sup.c | 13 ++++++++-----
 2 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index d7169e43f5e18..d6f814aa94aba 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -1506,10 +1506,15 @@ qla2x00_update_optrom(struct bsg_job *bsg_job)
 	    bsg_job->request_payload.sg_cnt, ha->optrom_buffer,
 	    ha->optrom_region_size);
 
-	ha->isp_ops->write_optrom(vha, ha->optrom_buffer,
+	rval = ha->isp_ops->write_optrom(vha, ha->optrom_buffer,
 	    ha->optrom_region_start, ha->optrom_region_size);
 
-	bsg_reply->result = DID_OK;
+	if (rval) {
+		bsg_reply->result = -EINVAL;
+		rval = -EINVAL;
+	} else {
+		bsg_reply->result = DID_OK;
+	}
 	vfree(ha->optrom_buffer);
 	ha->optrom_buffer = NULL;
 	ha->optrom_state = QLA_SWAITING;
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 76a38bf86cbc3..3da79ee1d88e4 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -2683,7 +2683,7 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 	uint32_t sec_mask, rest_addr, fdata;
 	void *optrom = NULL;
 	dma_addr_t optrom_dma;
-	int rval;
+	int rval, ret;
 	struct secure_flash_update_block *sfub;
 	dma_addr_t sfub_dma;
 	uint32_t offset = faddr << 2;
@@ -2939,11 +2939,12 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 write_protect:
 	ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
 	    "Protect flash...\n");
-	rval = qla24xx_protect_flash(vha);
-	if (rval) {
+	ret = qla24xx_protect_flash(vha);
+	if (ret) {
 		qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
 		ql_log(ql_log_warn, vha, 0x7099,
 		    "Failed protect flash\n");
+		rval = QLA_COMMAND_ERROR;
 	}
 
 	if (reset_to_rom == true) {
@@ -2951,10 +2952,12 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		qla2xxx_wake_dpc(vha);
 
-		rval = qla2x00_wait_for_hba_online(vha);
-		if (rval != QLA_SUCCESS)
+		ret = qla2x00_wait_for_hba_online(vha);
+		if (ret != QLA_SUCCESS) {
 			ql_log(ql_log_warn, vha, 0xffff,
 			    "Adapter did not come out of reset\n");
+			rval = QLA_COMMAND_ERROR;
+		}
 	}
 
 done:
-- 
2.20.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux