Begin forwarded message: Date: Thu, 21 Dec 2006 10:36:55 -0800 From: bugme-daemon@xxxxxxxxxxxxxxxxxxx To: bugme-new@xxxxxxxxxxxxxx Subject: [Bugme-new] [Bug 7726] New: New LSI MegaRAID driver fails when ACPI is not present http://bugzilla.kernel.org/show_bug.cgi?id=7726 Summary: New LSI MegaRAID driver fails when ACPI is not present Kernel Version: 2.6.17+ Status: NEW Severity: normal Owner: scsi_drivers-other@xxxxxxxxxxxxxxxxxxxx Submitter: bill@xxxxxxxxxxxxxxxxxx Most recent kernel where this bug did *NOT* occur:n/a Distribution:gentoo Hardware Environment:i686 Software Environment:gcc 4.1.1, glibc 2.5 Problem Description: during kernel boot, with noacpi option, megaraid driver detects and attempts to start the controller. it fails and goes into an endless loop of error "waiting for N commands to finish" and reset sequences. Steps to reproduce: boot kernel with acpi disabled using noacpi boot parameter. NOTE this will not fail on SMP machines because ACPI is always required. This test is valid only on single processor machines. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
