[PATCH v3 14/15] scsi_debug: zone_size_mb module parameter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Damien Le Moal <damien.lemoal@xxxxxxx>

Add the zone_size_mb module parameters to control the zone size of a
ZBC device. If the zone size specified is not a divisor of the device
capacity, the last zone of the device will be created as a smaller
"runt" zone. This parameter is ignored for device types other than
0x14 (zbc=2 case).

Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
Signed-off-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
---
 drivers/scsi/scsi_debug.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index a88f182af5c5..b02f98a00d28 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -800,7 +800,7 @@ static int dif_errors;
 
 /* ZBC global data */
 static bool sdeb_zbc_in_use;		/* true when ptype=TYPE_ZBC [0x14] */
-static const int zbc_zone_size_mb;
+static int sdeb_zbc_zone_size_mb;
 static int sdeb_zbc_max_open = DEF_ZBC_MAX_OPEN_ZONES;
 static int sdeb_zbc_nr_conv = DEF_ZBC_NR_CONV_ZONES;
 
@@ -4678,10 +4678,10 @@ static int sdebug_device_create_zones(struct sdebug_dev_info *devip)
 	unsigned int i;
 
 	/*
-	 * Set zone size: if zbc_zone_size_mb was not set, figure out a zone
-	 * size allowing for at least 4 zones on the device.
+	 * Set zone size: if sdeb_zbc_zone_size_mb was not set, figure out
+	 * a zone size allowing for at least 4 zones on the device.
 	 */
-	if (!zbc_zone_size_mb) {
+	if (!sdeb_zbc_zone_size_mb) {
 		devip->zsize = (DEF_ZBC_ZONE_SIZE_MB * SZ_1M)
 			>> ilog2(sdebug_sector_size);
 		while (capacity < devip->zsize * 4 && devip->zsize >= 2)
@@ -4691,7 +4691,7 @@ static int sdebug_device_create_zones(struct sdebug_dev_info *devip)
 			return -EINVAL;
 		}
 	} else {
-		devip->zsize = (zbc_zone_size_mb * SZ_1M)
+		devip->zsize = (sdeb_zbc_zone_size_mb * SZ_1M)
 			>> ilog2(sdebug_sector_size);
 		if (devip->zsize >= capacity) {
 			pr_err("Zone size too large for device capacity\n");
@@ -5464,6 +5464,7 @@ module_param_named(write_same_length, sdebug_write_same_length, int,
 module_param_named(zbc, sdeb_zbc_model_s, charp, S_IRUGO | S_IWUSR);
 module_param_named(zone_max_open, sdeb_zbc_max_open, int, S_IRUGO);
 module_param_named(zone_nr_conv, sdeb_zbc_nr_conv, int, S_IRUGO);
+module_param_named(zone_size_mb, sdeb_zbc_zone_size_mb, int, S_IRUGO);
 
 MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
 MODULE_DESCRIPTION("SCSI debug adapter driver");
@@ -5528,6 +5529,7 @@ MODULE_PARM_DESC(write_same_length, "Maximum blocks per WRITE SAME cmd (def=0xff
 MODULE_PARM_DESC(zbc, "'none' [0]; 'aware' [1]; 'managed' [2] (def=0). Can have 'host_' prefix");
 MODULE_PARM_DESC(zone_max_open, "Maximum number of open zones; [0] for no limit (def=auto)");
 MODULE_PARM_DESC(zone_nr_conv, "Number of conventional zones (def=1)");
+MODULE_PARM_DESC(zone_size_mb, "Zone size in MiB (def=auto)");
 
 #define SDEBUG_INFO_LEN 256
 static char sdebug_info[SDEBUG_INFO_LEN];
-- 
2.25.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux