[PATCH 08/25] qla2xxx: Add ql2xrdpenable module parameter for RDP

[Himanshu Madhani <hmadhani@xxxxxxxxxxx>]

From: Joe Carnuccio <joe.carnuccio@xxxxxxxxxx>

This patch provides separate module parameter
ql2xrdpenable to turn on/off RDP capability in
the driver. However, if ql2xsmartsan parameter
is enabled, it will also turn on ql2xfdmienable
parameter since its required for RDP to work.

Signed-off-by: Joe Carnuccio <joe.carnuccio@xxxxxxxxxx>
Signed-off-by: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_gbl.h  |  1 +
 drivers/scsi/qla2xxx/qla_init.c | 12 +++++++++---
 drivers/scsi/qla2xxx/qla_os.c   | 10 +++++++++-
 3 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 7679f8fa1ddc..cdd8d7947fa8 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -144,6 +144,7 @@ extern int qlport_down_retry;
 extern int ql2xplogiabsentdevice;
 extern int ql2xloginretrycount;
 extern int ql2xfdmienable;
+extern int ql2xrdpenable;
 extern int ql2xsmartsan;
 extern int ql2xallocfwdump;
 extern int ql2xextended_error_logging;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2b36a1bdcc5f..8fee3f5154c7 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2270,6 +2270,12 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
 	ql_dbg(ql_dbg_init, vha, 0x0078,
 	    "Verifying loaded RISC code...\n");
 
+	/* If smartsan enabled then require fdmi and rdp enabled */
+	if (ql2xsmartsan) {
+		ql2xfdmienable = 1;
+		ql2xrdpenable = 1;
+	}
+
 	if (qla2x00_isp_firmware(vha) != QLA_SUCCESS) {
 		rval = ha->isp_ops->chip_diag(vha);
 		if (rval)
@@ -3710,7 +3716,7 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 		}
 
 		/* Enable PUREX PASSTHRU */
-		if (ql2xsmartsan)
+		if (ql2xrdpenable)
 			qla25xx_set_els_cmds_supported(vha);
 	} else
 		goto failed;
@@ -3945,7 +3951,7 @@ qla24xx_update_fw_options(scsi_qla_host_t *vha)
 	}
 
 enable_purex:
-	if (ql2xsmartsan)
+	if (ql2xrdpenable)
 		ha->fw_options[1] |= ADD_FO1_ENABLE_PUREX_IOCB;
 
 	qla2x00_set_fw_options(vha, ha->fw_options);
@@ -8682,7 +8688,7 @@ qla83xx_update_fw_options(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
 
-	if (ql2xsmartsan)
+	if (ql2xrdpenable)
 		ha->fw_options[1] |= ADD_FO1_ENABLE_PUREX_IOCB;
 
 	qla2x00_set_fw_options(vha, ha->fw_options);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 96f5577d3679..4be99f13be42 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -113,7 +113,8 @@ module_param(ql2xfdmienable, int, S_IRUGO|S_IWUSR);
 module_param_named(fdmi, ql2xfdmienable, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
 		"Enables FDMI registrations. "
-		"0 - no FDMI. Default is 1 - perform FDMI.");
+		"0 - no FDMI registrations. "
+		"1 - provide FDMI registrations (default).");
 
 #define MAX_Q_DEPTH	64
 static int ql2xmaxqdepth = MAX_Q_DEPTH;
@@ -313,6 +314,13 @@ MODULE_PARM_DESC(ql2xsmartsan,
                " Default is 0 - No SmartSAN registration,"
                " 1 - Register SmartSAN Management Attributes.");
 
+int ql2xrdpenable;
+module_param(ql2xrdpenable, int, 0444);
+module_param_named(rdpenable, ql2xrdpenable, int, 0444);
+MODULE_PARM_DESC(ql2xrdpenable,
+		"Enables RDP responses. "
+		"0 - no RDP responses (default). "
+		"1 - provide RDP responses.");
 
 static void qla2x00_clear_drv_active(struct qla_hw_data *);
 static void qla2x00_free_device(scsi_qla_host_t *);
-- 
2.12.0