Re: [PATCH v9 3/7] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-02-11 11:09, hongwus@xxxxxxxxxxxxxx wrote:
Hi Can,


On 2020-02-11 10:37, Can Guo wrote:
The bus bandwidth voting is required to be done before the bus clocks
are enabled, and the unvoting is required to be done only after the bus
clocks are disabled.

Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
Reviewed-by: Asutosh Das <asutoshd@xxxxxxxxxxxxxx>
---
drivers/scsi/ufs/ufs-qcom.c | 78 ++++++++++++++++++++++++++++++---------------
 1 file changed, 53 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index c69c29a1c..ded08fb 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -38,7 +38,6 @@ enum {

 static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];

-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote); static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
 						       u32 clk_cycles);
@@ -674,7 +673,7 @@ static void ufs_qcom_get_speed_mode(struct
ufs_pa_layer_attr *p, char *result)
 	}
 }

-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote) +static int __ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
 {
 	int err = 0;

@@ -705,7 +704,7 @@ static int ufs_qcom_update_bus_bw_vote(struct
ufs_qcom_host *host)

 	vote = ufs_qcom_get_bus_vote(host, mode);
 	if (vote >= 0)
-		err = ufs_qcom_set_bus_vote(host, vote);
+		err = __ufs_qcom_set_bus_vote(host, vote);
 	else
 		err = vote;

@@ -716,6 +715,35 @@ static int ufs_qcom_update_bus_bw_vote(struct
ufs_qcom_host *host)
 	return err;
 }

+static int ufs_qcom_set_bus_vote(struct ufs_hba *hba, bool on)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	int vote, err;
+
+	/*
+	 * In case ufs_qcom_init() is not yet done, simply ignore.
+	 * This ufs_qcom_set_bus_vote() shall be called from
+	 * ufs_qcom_init() after init is done.
+	 */
+	if (!host)
+		return 0;
+
+	if (on) {
+		vote = host->bus_vote.saved_vote;
+		if (vote == host->bus_vote.min_bw_vote)
+			ufs_qcom_update_bus_bw_vote(host);
+	} else {
+		vote = host->bus_vote.min_bw_vote;
+	}
+
+	err = __ufs_qcom_set_bus_vote(host, vote);
+	if (err)
+		dev_err(hba->dev, "%s: set bus vote failed %d\n",
+				 __func__, err);
+
+	return err;
+}
+
 static ssize_t
show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
 			char *buf)
@@ -792,7 +820,7 @@ static int ufs_qcom_update_bus_bw_vote(struct
ufs_qcom_host *host)
 	return 0;
 }

-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+static int ufs_qcom_set_bus_vote(struct ufs_hba *host, bool on)
 {
 	return 0;
 }
@@ -1030,8 +1058,7 @@ static int ufs_qcom_setup_clocks(struct ufs_hba
*hba, bool on,
 				 enum ufs_notify_change_status status)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	int err;
-	int vote = 0;
+	int err = 0;

 	/*
 	 * In case ufs_qcom_init() is not yet done, simply ignore.
@@ -1041,28 +1068,28 @@ static int ufs_qcom_setup_clocks(struct
ufs_hba *hba, bool on,
 	if (!host)
 		return 0;

-	if (on && (status == POST_CHANGE)) {
-		/* enable the device ref clock for HS mode*/
-		if (ufshcd_is_hs_mode(&hba->pwr_info))
-			ufs_qcom_dev_ref_clk_ctrl(host, true);
-		vote = host->bus_vote.saved_vote;
-		if (vote == host->bus_vote.min_bw_vote)
-			ufs_qcom_update_bus_bw_vote(host);
-
-	} else if (!on && (status == PRE_CHANGE)) {
-		if (!ufs_qcom_is_link_active(hba)) {
-			/* disable device ref_clk */
-			ufs_qcom_dev_ref_clk_ctrl(host, false);
+	switch(status) {
+	case PRE_CHANGE:
+		if (on) {
+			err = ufs_qcom_set_bus_vote(hba, true);
+		} else {
+			if (!ufs_qcom_is_link_active(hba)) {
+				/* disable device ref_clk */
+				ufs_qcom_dev_ref_clk_ctrl(host, false);
+			}
 		}
-
-		vote = host->bus_vote.min_bw_vote;
+		break;
+	case POST_CHANGE:
+		if (on) {
+			/* enable the device ref clock for HS mode*/
+			if (ufshcd_is_hs_mode(&hba->pwr_info))
+				ufs_qcom_dev_ref_clk_ctrl(host, true);
+		} else {
+			err = ufs_qcom_set_bus_vote(hba, false);
+		}
+		break;
 	}

-	err = ufs_qcom_set_bus_vote(host, vote);
-	if (err)
-		dev_err(hba->dev, "%s: set bus vote failed %d\n",
-				__func__, err);
-
 	return err;
 }

@@ -1238,6 +1265,7 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_set_caps(hba);
 	ufs_qcom_advertise_quirks(hba);

+	ufs_qcom_set_bus_vote(hba, true);
 	ufs_qcom_setup_clocks(hba, true, POST_CHANGE);

 	if (hba->dev->id < MAX_UFS_QCOM_HOSTS)


  Please add space after switch.
+    switch(status) {
+    case PRE_CHANGE


Reviewed-by: Hongwu Su <hongwus@xxxxxxxxxxxxxx>

Thanks.

Can Guo.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux