The current code does some odd +1 over maximum xri count checks and
requires that the lun_queue_count can't be bigger than maximum xri
count divided by 8. These items are bogus.
Clean the code up to cap lun_queue_count to maximum xri count.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_attr.c | 3 ---
drivers/scsi/lpfc/lpfc_init.c | 17 ++++-------------
drivers/scsi/lpfc/lpfc_sli.c | 9 ---------
3 files changed, 4 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 46f56f30f77e..48b6c98ec922 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3869,9 +3869,6 @@ LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,
/*
# lun_queue_depth: This parameter is used to limit the number of outstanding
# commands per FCP LUN. Value range is [1,512]. Default value is 30.
-# If this parameter value is greater than 1/8th the maximum number of exchanges
-# supported by the HBA port, then the lun queue depth will be reduced to
-# 1/8th the maximum number of exchanges.
*/
LPFC_VPORT_ATTR_R(lun_queue_depth, 30, 1, 512,
"Max number of FCP commands we can queue to a specific LUN");
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 9a6191818a23..6d571e0b74f0 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -512,21 +512,12 @@ lpfc_config_port_post(struct lpfc_hba *phba)
lpfc_sli_read_link_ste(phba);
/* Reset the DFT_HBA_Q_DEPTH to the max xri */
- i = (mb->un.varRdConfig.max_xri + 1);
- if (phba->cfg_hba_queue_depth > i) {
+ if (phba->cfg_hba_queue_depth > mb->un.varRdConfig.max_xri) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"3359 HBA queue depth changed from %d to %d\n",
- phba->cfg_hba_queue_depth, i);
- phba->cfg_hba_queue_depth = i;
- }
-
- /* Reset the DFT_LUN_Q_DEPTH to (max xri >> 3) */
- i = (mb->un.varRdConfig.max_xri >> 3);
- if (phba->pport->cfg_lun_queue_depth > i) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "3360 LUN queue depth changed from %d to %d\n",
- phba->pport->cfg_lun_queue_depth, i);
- phba->pport->cfg_lun_queue_depth = i;
+ phba->cfg_hba_queue_depth,
+ mb->un.varRdConfig.max_xri);
+ phba->cfg_hba_queue_depth = mb->un.varRdConfig.max_xri;
}
phba->lmt = mb->un.varRdConfig.lmt;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index ab6f58bc80a4..a5fd043e9be4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -7371,15 +7371,6 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
phba->vpd.rev.fcphHigh, phba->vpd.rev.fcphLow,
phba->vpd.rev.feaLevelHigh, phba->vpd.rev.feaLevelLow);
- /* Reset the DFT_LUN_Q_DEPTH to (max xri >> 3) */
- rc = (phba->sli4_hba.max_cfg_param.max_xri >> 3);
- if (phba->pport->cfg_lun_queue_depth > rc) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "3362 LUN queue depth changed from %d to %d\n",
- phba->pport->cfg_lun_queue_depth, rc);
- phba->pport->cfg_lun_queue_depth = rc;
- }
-
if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
LPFC_SLI_INTF_IF_TYPE_0) {
lpfc_set_features(phba, mboxq, LPFC_SET_UE_RECOVERY);
--
2.13.7
