[PATCH 3/7] scsi: hisi_sas: Replace magic number when handle channel interrupt

[John Garry <john.garry@xxxxxxxxxx>]

From: Luo Jiaxing <luojiaxing@xxxxxxxxxx>

We use magic number as offset and mask when handle channel interrupt, so
use marco to replace it.

Signed-off-by: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 34a3781a2a85..878530f6945f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -495,6 +495,13 @@ struct hisi_sas_err_record_v3 {
 #define BASE_VECTORS_V3_HW  16
 #define MIN_AFFINE_VECTORS_V3_HW  (BASE_VECTORS_V3_HW + 1)
 
+#define CHNL_INT_STS_MSK	0xeeeeeeee
+#define CHNL_INT_STS_PHY_MSK	0xe
+#define CHNL_INT_STS_INT0_MSK BIT(1)
+#define CHNL_INT_STS_INT1_MSK BIT(2)
+#define CHNL_INT_STS_INT2_MSK BIT(3)
+#define CHNL_WIDTH 4
+
 enum {
 	DSM_FUNC_ERR_HANDLE_MSI = 0,
 };
@@ -1819,19 +1826,19 @@ static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
 	int phy_no = 0;
 
 	irq_msk = hisi_sas_read32(hisi_hba, CHNL_INT_STATUS)
-				& 0xeeeeeeee;
+		  & CHNL_INT_STS_MSK;
 
 	while (irq_msk) {
-		if (irq_msk & (2 << (phy_no * 4)))
+		if (irq_msk & (CHNL_INT_STS_INT0_MSK << (phy_no * CHNL_WIDTH)))
 			handle_chl_int0_v3_hw(hisi_hba, phy_no);
 
-		if (irq_msk & (4 << (phy_no * 4)))
+		if (irq_msk & (CHNL_INT_STS_INT1_MSK << (phy_no * CHNL_WIDTH)))
 			handle_chl_int1_v3_hw(hisi_hba, phy_no);
 
-		if (irq_msk & (8 << (phy_no * 4)))
+		if (irq_msk & (CHNL_INT_STS_INT2_MSK << (phy_no * CHNL_WIDTH)))
 			handle_chl_int2_v3_hw(hisi_hba, phy_no);
 
-		irq_msk &= ~(0xe << (phy_no * 4));
+		irq_msk &= ~(CHNL_INT_STS_PHY_MSK << (phy_no * CHNL_WIDTH));
 		phy_no++;
 	}
 
-- 
2.17.1