From: Steve Sistare <steven.sistare@xxxxxxxxxx>
[ Upstream commit 31b6a05f86e690e1818116fd23c3be915cc9d9ed ]
megaraid_sas takes 1+ seconds to load while waiting for firmware:
[2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state
This is due to the following loop in megasas_transition_to_ready(), which
waits a minimum of 1 second, even though the FW becomes ready in tens of
millisecs:
/*
* The cur_state should not last for more than max_wait secs
*/
for (i = 0; i < max_wait; i++) {
...
msleep(1000);
...
dev_info(&instance->pdev->dev, "FW now in Ready state\n");
This is a regression, caused by a change of the msleep granularity from 1
to 1000 due to concern about waiting too long on systems with coarse
jiffies.
To fix, increase iterations and use msleep(20), which results in:
[2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state
Fixes: fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity")
Signed-off-by: Steve Sistare <steven.sistare@xxxxxxxxxx>
Acked-by: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 577513649afb..6abad63b127a 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3823,12 +3823,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
/*
* The cur_state should not last for more than max_wait secs
*/
- for (i = 0; i < max_wait; i++) {
+ for (i = 0; i < max_wait * 50; i++) {
curr_abs_state = instance->instancet->
read_fw_status_reg(instance->reg_set);
if (abs_state == curr_abs_state) {
- msleep(1000);
+ msleep(20);
} else
break;
}
--
2.20.1
