[PATCH v2 01/11] megaraid_sas: Reset adapter if FW is not in READY state after device resume

[Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>]

After device resume we expect the firmware to be in READY state.
Transition to READY might fail due to unhandled exceptions,such
as an internal error or a hardware failure.Retry initiating chip
reset and wait for the controller to come to ready state.

Signed-off-by: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
Signed-off-by: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index a4bc814..96b893f 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -7593,6 +7593,7 @@ static void megasas_shutdown_controller(struct megasas_instance *instance,
 	struct Scsi_Host *host;
 	struct megasas_instance *instance;
 	int irq_flags = PCI_IRQ_LEGACY;
+	u32 status_reg;
 
 	instance = pci_get_drvdata(pdev);
 
@@ -7620,9 +7621,35 @@ static void megasas_shutdown_controller(struct megasas_instance *instance,
 	/*
 	 * We expect the FW state to be READY
 	 */
-	if (megasas_transition_to_ready(instance, 0))
-		goto fail_ready_state;
 
+	if (megasas_transition_to_ready(instance, 0)) {
+		dev_info(&instance->pdev->dev,
+			 "Failed to transition controller to ready from %s!\n",
+			 __func__);
+		if (instance->adapter_type != MFI_SERIES) {
+			status_reg =
+			instance->instancet->read_fw_status_reg(instance);
+			if (!(status_reg & MFI_RESET_ADAPTER) ||
+				((megasas_adp_reset_wait_for_ready
+				(instance, true, 0)) == FAILED))
+				goto fail_ready_state;
+		} else {
+			atomic_set(&instance->fw_reset_no_pci_access, 1);
+			instance->instancet->adp_reset
+				(instance, instance->reg_set);
+			atomic_set(&instance->fw_reset_no_pci_access, 0);
+
+			/* waiting for about 30 seconds before retry */
+			ssleep(30);
+
+			if (megasas_transition_to_ready(instance, 0))
+				goto fail_ready_state;
+		}
+
+		dev_info(&instance->pdev->dev,
+			 "FW restarted successfully from %s!\n",
+			 __func__);
+	}
 	if (megasas_set_dma_mask(instance))
 		goto fail_set_dma_mask;
 
-- 
1.8.3.1