[PATCH 09/11] megaraid_sas: Return pended IOCTLs after 3 retries

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IOCTL/s causing firmware fault may end up in failed controller resets and
finally killing the adapter.

This patch fixes this problem as stated as below:
In OCR sequence, driver will attempt refiring pended IOCTLs upto two times.
If first two attempts fail, then in third attempt driver will return pended
IOCTLs with EBUSY status to application. These changes are done to ensure
if any of pended IOCTLs is causing firmware fault and resulting into OCR
failure, then in last attempt of OCR  driver will refrain firing it to
firmware and saving adapter from being killed due to faulty IOCTL.

Signed-off-by: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
Signed-off-by: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
---
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 58 +++++++++++++++++++++++++++--
 1 file changed, 55 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 8b6cc1b..0bdd477 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -4223,7 +4223,8 @@ void  megasas_reset_reply_desc(struct megasas_instance *instance)
  * megasas_refire_mgmt_cmd :	Re-fire management commands
  * @instance:				Controller's soft instance
 */
-static void megasas_refire_mgmt_cmd(struct megasas_instance *instance)
+void megasas_refire_mgmt_cmd(struct megasas_instance *instance,
+			     bool return_ioctl)
 {
 	int j;
 	struct megasas_cmd_fusion *cmd_fusion;
@@ -4287,6 +4288,16 @@ static void megasas_refire_mgmt_cmd(struct megasas_instance *instance)
 			break;
 		}
 
+		if (return_ioctl && cmd_mfi->sync_cmd &&
+		    cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT) {
+			dev_err(&instance->pdev->dev,
+				"return -EBUSY from %s %d cmd 0x%x opcode 0x%x\n",
+				__func__, __LINE__, cmd_mfi->frame->hdr.cmd,
+				le32_to_cpu(cmd_mfi->frame->dcmd.opcode));
+			cmd_mfi->cmd_status_drv = DCMD_BUSY;
+			result = COMPLETE_CMD;
+		}
+
 		switch (result) {
 		case REFIRE_CMD:
 			megasas_fire_cmd_fusion(instance, req_desc);
@@ -4302,6 +4313,37 @@ static void megasas_refire_mgmt_cmd(struct megasas_instance *instance)
 }
 
 /*
+ * megasas_return_polled_cmds: Return polled mode commands back to the pool
+ *			       before initiating an OCR.
+ * @instance:                  Controller's soft instance
+ */
+static void
+megasas_return_polled_cmds(struct megasas_instance *instance)
+{
+	int i;
+	struct megasas_cmd_fusion *cmd_fusion;
+	struct fusion_context *fusion;
+	struct megasas_cmd *cmd_mfi;
+
+	fusion = instance->ctrl_context;
+
+	for (i = instance->max_scsi_cmds; i < instance->max_fw_cmds; i++) {
+		cmd_fusion = fusion->cmd_list[i];
+		cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
+
+		if (cmd_mfi->flags & DRV_DCMD_POLLED_MODE) {
+			if (megasas_dbg_lvl & OCR_DEBUG)
+				dev_info(&instance->pdev->dev,
+					 "%s %d return cmd 0x%x opcode 0x%x\n",
+					 __func__, __LINE__, cmd_mfi->frame->hdr.cmd,
+					 le32_to_cpu(cmd_mfi->frame->dcmd.opcode));
+			cmd_mfi->flags &= ~DRV_DCMD_POLLED_MODE;
+			megasas_return_cmd(instance, cmd_mfi);
+		}
+	}
+}
+
+/*
  * megasas_track_scsiio : Track SCSI IOs outstanding to a SCSI device
  * @instance: per adapter struct
  * @channel: the channel assigned by the OS
@@ -4956,7 +4998,9 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason)
 				goto kill_hba;
 			}
 
-			megasas_refire_mgmt_cmd(instance);
+			megasas_refire_mgmt_cmd(instance,
+						(i == (MEGASAS_FUSION_MAX_RESET_TRIES - 1)
+							? 1 : 0));
 
 			/* Reset load balance info */
 			if (fusion->load_balance_info)
@@ -4964,8 +5008,16 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason)
 				       (sizeof(struct LD_LOAD_BALANCE_INFO) *
 				       MAX_LOGICAL_DRIVES_EXT));
 
-			if (!megasas_get_map_info(instance))
+			if (!megasas_get_map_info(instance)) {
 				megasas_sync_map_info(instance);
+			} else {
+				/*
+				 * Return pending polled mode cmds before
+				 * retrying OCR
+				 */
+				megasas_return_polled_cmds(instance);
+				continue;
+			}
 
 			megasas_setup_jbod_map(instance);
 
-- 
1.8.3.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux