This is mostly update of the usual drivers: aacraid, ufs, zfcp, NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx plus a whole load of minor updates and fixes. The two major core changes are Al Viro's reworking of sg's handling of copy to/from user, Ming Lei's removal of the host busy counter to avoid contention in the multiqueue case and Damien Le Moal's fixing of residual tracking across error handling. We have one conflict in scsi_sysfs.c due to Paul McKenney's RCU change (c0eaf15cd5d3 drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer) and an update to the sysfs parameters. However, the fix is pretty easy based on Paul's patch. We're still chasing a performance regression on USB flash devices triggered by the elimination of the legacy (non-mq) submission path, but right at the moment it's looking like a block issue with multiqueue and submission ordering: https://lore.kernel.org/linux-scsi/Pine.LNX.4.44L0.1908201307540.1573-100000@xxxxxxxxxxxxxxxxxxxx/ The patch is available here: git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc The short changelog is: Al Viro (8): scsi: sg: sg_ioctl(): get rid of access_ok() scsi: sg: sg_write(): get rid of access_ok()/__copy_from_user()/__get_user() scsi: sg: sg_read(): get rid of access_ok()/__copy_..._user() scsi: sg: sg_new_write(): don't bother with access_ok scsi: sg: sg_read(): simplify reading ->pack_id of userland sg_io_hdr_t scsi: sg: sg_write(): __get_user() can fail... scsi: sg: sg_new_write(): replace access_ok() + __copy_from_user() with copy_from_user() scsi: sg: sg_ioctl(): fix copyout handling Anatol Pomazau (1): scsi: iscsi: Don't send data to unbound connection Arkadiusz Drabczyk (1): scsi: csiostor: Fix spelling typos Arun Easi (2): scsi: qla2xxx: Fix device connect issues in P2P configuration scsi: qla2xxx: Fix memory leak when sending I/O fails Asutosh Das (1): scsi: ufs: Abort gating if clock on request is pending Austin Kim (2): scsi: libcxgbi: remove unused function to stop warning scsi: qedf: Remove always false 'tmp_prio < 0' statement Balsundar P (7): scsi: aacraid: bump version scsi: aacraid: send AIF request post IOP RESET scsi: aacraid: check adapter health scsi: aacraid: setting different timeout for src and thor scsi: aacraid: fixed firmware assert issue scsi: aacraid: fixed IO reporting error scsi: aacraid: fix illegal IO beyond last LBA Bart Van Assche (14): scsi: target: core: Fix a pr_debug() argument scsi: target: iscsi: Wait for all commands to finish before freeing a session scsi: target: core: Release SPC-2 reservations when closing a session scsi: target: core: Document target_cmd_size_check() scsi: lpfc: Fix lpfc_cpumask_of_node_init() scsi: lpfc: Fix a kernel warning triggered by lpfc_sli4_enable_intr() scsi: lpfc: Fix a kernel warning triggered by lpfc_get_sgl_per_hdwq() scsi: qla2xxx: Fix a dma_pool_free() call scsi: qla2xxx: Remove an include directive scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6) scsi: core: scsi_trace: Use get_unaligned_be*() scsi: ufs: Use enum dev_cmd_type where appropriate scsi: ufs: Fix kernel-doc warnings scsi: target: Remove tpg_list and se_portal_group.se_tpg_node Bean Huo (3): scsi: ufs: fix potential bug which ends in system hang scsi: ufs: print helpful hint when response size exceed buffer size scsi: ufs: delete redundant function ufshcd_def_desc_sizes() Benjamin Block (9): scsi: zfcp: move maximum age of diagnostic buffers into a per-adapter variable scsi: zfcp: implicitly refresh config-data diagnostics when reading sysfs scsi: zfcp: introduce sysfs interface to read the local B2B-Credit scsi: zfcp: implicitly refresh port-data diagnostics when reading sysfs scsi: zfcp: introduce sysfs interface for diagnostics of local SFP transceiver scsi: zfcp: support retrieval of SFP Data via Exchange Port Data scsi: zfcp: add diagnostics buffer for exchange config data scsi: zfcp: diagnostics buffer caching and use for exchange port data scsi: zfcp: signal incomplete or error for sync exchange config/port data Can Guo (4): scsi: ufs: Fix register dump caused sleep in atomic context scsi: ufs: Fix up auto hibern8 enablement scsi: ufs-qcom: Add reset control support for host controller scsi: ufs: Add device reset in link recovery path Chandrakanth Patil (1): scsi: megaraid_sas: Unique names for MSI-X vectors Colin Ian King (10): scsi: arcmsr: fix indentation issues scsi: smartpqi: clean up an indentation issue scsi: csiostor: clean up indentation issue scsi: hisi_sas: fix spelling mistake "digial" -> "digital" scsi: ufs: make array setup_attrs static const, makes object smaller scsi: ips: make array 'options' static const, makes object smaller scsi: fnic: make array dev_cmd_err static const, makes object smaller scsi: mvsas: remove redundant assignment to variable rc scsi: qla2xxx: remove redundant assignment to pointer host scsi: smartpqi: clean up indentation of a statement Damien Le Moal (3): scsi: target: tcmu: Prevent memory reclaim recursion scsi: core: Fix scsi_get/set_resid() interface scsi: core: save/restore command resid for error handling Dan Carpenter (3): scsi: esas2r: unlock on error in esas2r_nvram_read_direct() scsi: csiostor: Don't enable IRQs too early scsi: mpt3sas: Clean up some indenting Daniel Wagner (2): scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry() scsi: qedf: Add port_id getter David Disseldorp (3): scsi: target: remove unused extension parameters scsi: target: fix SendTargets=All string compares scsi: target: compare full CHAP_A Algorithm strings Deepak Ukey (2): scsi: pm80xx: Modified the logic to collect fatal dump scsi: pm80xx: Controller fatal error through sysfs Don Brace (1): scsi: smartpqi: bump version Finn Thain (5): scsi: NCR5380: Add disconnect_mask module parameter scsi: NCR5380: Unconditionally clear ICR after do_abort() scsi: NCR5380: Call scsi_set_resid() on command completion scsi: core: Clean up SG_NONE scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE Geert Uytterhoeven (2): scsi: Fix various misspellings of "connect" scsi: isci: Spelling s/configruation/configuration/ Himanshu Madhani (5): scsi: qla2xxx: Update driver version to 10.01.00.21-k scsi: qla2xxx: Update driver version to 10.01.00.20-k scsi: qla2xxx: Improve logging for scan thread scsi: MAINTAINERS: Update qla2xxx driver scsi: qla2xxx: Silence fwdump template message James Smart (56): scsi: lpfc: use hdwq assigned cpu for allocation scsi: lpfc: Update lpfc version to 12.6.0.2 scsi: lpfc: revise nvme max queues to be hdwq count scsi: lpfc: Initialize cpu_map for not present cpus scsi: lpfc: fix inlining of lpfc_sli4_cleanup_poll_list() scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences scsi: lpfc: fix: Coverity: lpfc_get_scsi_buf_s3(): Null pointer dereferences scsi: lpfc: Update lpfc version to 12.6.0.1 scsi: lpfc: Add enablement of multiple adapter dumps scsi: lpfc: Change default IRQ model on AMD architectures scsi: lpfc: Add registration for CPU Offline/Online events scsi: lpfc: Clarify FAWNN error message scsi: lpfc: Sync with FC-NVMe-2 SLER change to require Conf with SLER scsi: lpfc: Fix dynamic fw log enablement check scsi: lpfc: Fix unexpected error messages during RSCN handling scsi: lpfc: Fix kernel crash at lpfc_nvme_info_show during remote port bounce scsi: lpfc: Fix configuration of BB credit recovery in service parameters scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow scsi: lpfc: fix spelling error in MAGIC_NUMER_xxx scsi: lpfc: fix build error of lpfc_debugfs.c for vfree/vmalloc scsi: lpfc: Update lpfc version to 12.6.0.0 scsi: lpfc: Add additional discovery log messages scsi: lpfc: Add FC-AL support to lpe32000 models scsi: lpfc: Add FA-WWN Async Event reporting scsi: lpfc: Add log macros to allow print by serverity or verbosity setting scsi: lpfc: Make FW logging dynamically configurable scsi: lpfc: Revise interrupt coalescing for missing scenarios scsi: lpfc: Remove lock contention target write path scsi: lpfc: Slight fast-path performance optimizations scsi: lpfc: fix coverity error of dereference after null check scsi: lpfc: Fix hardlockup in lpfc_abort_handler scsi: lpfc: Fix bad ndlp ptr in xri aborted handling scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices scsi: lpfc: Fix lockdep errors in sli_ringtx_put scsi: lpfc: Fix reporting of read-only fw error errors scsi: lpfc: fix lpfc_nvmet_mrq to be bound by hdw queue count scsi: lpfc: Update lpfc version to 12.4.0.1 scsi: lpfc: cleanup: remove unused fcp_txcmlpq_cnt scsi: lpfc: Complete removal of FCoE T10 PI support on SLI-4 adapters scsi: lpfc: Update async event logging scsi: lpfc: Fix list corruption detected in lpfc_put_sgl_per_hdwq scsi: lpfc: Fix hdwq sgl locks and irq handling scsi: lpfc: Fix spinlock_irq issues in lpfc_els_flush_cmd() scsi: lpfc: Fix list corruption in lpfc_sli_get_iocbq scsi: lpfc: Fix host hang at boot or slow boot scsi: lpfc: Fix coverity errors on NULL pointer checks scsi: lpfc: Fix NVMe ABTS in response to receiving an ABTS scsi: lpfc: Fix discovery failures when target device connectivity bounces scsi: lpfc: Fix GPF on scsi command completion scsi: lpfc: Fix locking on mailbox command completion scsi: lpfc: Fix device recovery errors after PLOGI failures scsi: lpfc: Fix rpi release when deleting vport scsi: lpfc: Fix NVME io abort failures causing hangs scsi: lpfc: Fix miss of register read failure check scsi: lpfc: Fix premature re-enabling of interrupts in lpfc_sli_host_down scsi: lpfc: Fix pt2pt discovery on SLI3 HBAs Johan Hovold (2): scsi: nsp_cs: enable compile-testing on 64-bit scsi: nsp_cs: drop redundant MODULE_LICENSE ifdef John Garry (1): scsi: hisi_sas: Stop converting a bool into a bool John Sperbeck (1): scsi: pm80xx: Initialize variable used as return status Kars de Jong (1): scsi: zorro_esp: Limit DMA transfers to 65536 bytes (except on Fastlane) Kevin Barnett (6): scsi: smartpqi: Align driver syntax with oob scsi: smartpqi: remove unused manifest constants scsi: smartpqi: fix problem with unique ID for physical device scsi: smartpqi: correct syntax issue scsi: smartpqi: change TMF timeout from 60 to 30 seconds scsi: smartpqi: fix controller lockup observed during force reboot Laurence Oberman (2): scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort() scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF Long Li (1): scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue Luo Jiaxing (14): scsi: hisi_sas: Record the phy down event in debugfs scsi: hisi_sas: Delete the debugfs folder of hisi_sas when the probe fails scsi: hisi_sas: Add ability to have multiple debugfs dumps scsi: hisi_sas: Add module parameter for debugfs dump count scsi: hisi_sas: Allocate memory for multiple dumps of debugfs scsi: hisi_sas: Add debugfs file structure for ITCT cache scsi: hisi_sas: Add debugfs file structure for IOST cache scsi: hisi_sas: Add debugfs file structure for ITCT scsi: hisi_sas: Add debugfs file structure for IOST scsi: hisi_sas: Add debugfs file structure for port scsi: hisi_sas: Add debugfs file structure for registers scsi: hisi_sas: Add debugfs file structure for DQ scsi: hisi_sas: Add debugfs file structure for CQ scsi: hisi_sas: Add timestamp for a debugfs dump Markus Elfring (1): scsi: ufs-hisi: Use PTR_ERR_OR_ZERO() in ufs_hisi_get_resource() Martin K. Petersen (1): Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails" Martin Wilck (2): scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVME scsi: qla2xxx: initialize fc4_type_priority Masahiro Yamada (1): scsi: ch: add include guard to chio.h Maurizio Lombardi (4): scsi: scsi_debug: num_tgts must be >= 0 scsi: target: iscsi: rename some variables to avoid confusion. scsi: target: iscsi: tie the challenge length to the hash digest size scsi: target: iscsi: CHAP: add support for SHA1, SHA256 and SHA3-256 Michael Hernandez (1): scsi: qla2xxx: Dual FCP-NVMe target port support Milan P. Gandhi (1): scsi: core: Log SCSI command age with errors Ming Lei (1): scsi: core: avoid host-wide host_busy counter for scsi_mq Murthy Bhat (2): scsi: smartpqi: fix LUN reset when fw bkgnd thread is hung scsi: smartpqi: fix call trace in device discovery Navid Emamdoost (1): scsi: bfa: release allocated memory in case of error Oliver Neukum (1): scsi: sd: Ignore a failure to sync cache due to lack of authorization Pan Bian (3): scsi: bnx2i: fix potential use after free scsi: qla4xxx: fix double free bug scsi: fnic: fix use after free Quinn Tran (15): scsi: qla2xxx: Fix double scsi_done for abort path scsi: qla2xxx: Fix driver unload hang scsi: qla2xxx: Fix SRB leak on switch command timeout scsi: qla2xxx: Do command completion on abort timeout scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure scsi: qla2xxx: Capture FW dump on MPI heartbeat stop event scsi: qla2xxx: Check for MB timeout while capturing ISP27/28xx FW dump scsi: qla2xxx: Set remove flag for all VP scsi: qla2xxx: Add error handling for PLOGI ELS passthrough scsi: qla2xxx: Fix Nport ID display value scsi: qla2xxx: Fix N2N link up fail scsi: qla2xxx: Fix N2N link reset scsi: qla2xxx: Optimize NPIV tear down process scsi: qla2xxx: Fix stale mem access on driver unload scsi: qla2xxx: Fix unbound sleep in fcport delete path. Ryan Attard (1): scsi: core: Add sysfs attributes for VPD pages 0h and 89h Saurav Girepunje (6): scsi: csiostor: Return value not required for csio_dfs_destroy scsi: csiostor: Fix NULL check before debugfs_remove_recursive scsi: pm8001: Fix Use plain integer as NULL pointer scsi: lpfc: Fix NULL check before mempool_destroy is not needed scsi: lpfc: lpfc_nvmet: Fix Use plain integer as NULL pointer scsi: lpfc: lpfc_attr: Fix Use plain integer as NULL pointer Sreekanth Reddy (13): scsi: mpt3sas: Bump mpt3sas driver version to 32.100.00.00 scsi: mpt3sas: Fix module parameter max_msix_vectors scsi: mpt3sas: Reject NVMe Encap cmnds to unsupported HBA scsi: mpt3sas: Use Component img header to get Package ver scsi: mpt3sas: Fail release cmnd if diag buffer is released scsi: mpt3sas: Add app owned flag support for diag buffer scsi: mpt3sas: Reuse diag buffer allocated at load time scsi: mpt3sas: clear release bit when buffer reregistered scsi: mpt3sas: Maintain owner of buffer through UniqueID scsi: mpt3sas: Free diag buffer without any status check scsi: mpt3sas: Fix clear pending bit in ioctl status scsi: mpt3sas: Display message before releasing diag buffer scsi: mpt3sas: Register trace buffer based on NVDATA settings Stanley Chu (4): scsi: ufs-mediatek: enable auto suspend capability scsi: ufs: override auto suspend tunables for ufs scsi: core: allow auto suspend override by low-level driver scsi: ufs: skip shutdown if hba is not powered Steffen Maier (3): scsi: zfcp: trace channel log even for FCP command responses scsi: zfcp: proper indentation to reduce confusion in zfcp_erp_required_act scsi: zfcp: fix reaction on bit error threshold notification Subhash Jadavani (1): scsi: ufs: Fix error handing during hibern8 enter Tomas Henzl (1): scsi: mpt3sas: change allocation option Venkat Gopalakrishnan (1): scsi: ufs: Fix irq return code Vignesh Raghavendra (2): scsi: ufs: Add driver for TI wrapper for Cadence UFS IP scsi: dt-bindings: ufs: ti,j721e-ufs.yaml: Add binding for TI UFS wrapper Vikram Auradkar (3): scsi: pm80xx: Tie the interrupt name to the module instance scsi: pm80xx: Fix dereferencing dangling pointer scsi: pm80xx: Convert 'long' mdelay to msleep Vinod Koul (1): scsi: dt-bindings: ufs: Add sm8150 compatible string Xiang Chen (8): scsi: hisi_sas: Relocate call to hisi_sas_debugfs_exit() scsi: hisi_sas: Return directly if init hardware failed scsi: hisi_sas: Check sas_port before using it scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec() scsi: hisi_sas: use wait_for_completion_timeout() when clearing ITCT scsi: hisi_sas: Set the BIST init value before enabling BIST scsi: hisi_sas: Don't create debugfs dump folder twice scsi: megaraid: disable device when probe failed after enabled device YueHaibing (8): scsi: ufs: ufshcd: Remove dev_err() on platform_get_irq() failure scsi: csiostor: Remove set but not used variable 'rln' scsi: lpfc: Make lpfc_debugfs_ras_log_data static scsi: cxgb4i: remove set but not used variable 'ppmax' scsi: cxlflash: remove set but not used variable 'ioarcb' scsi: bfa: Make restart_bfa static scsi: smartpqi: remove set but not used variable 'ctrl_info' scsi: hisi_sas: Make three functions static ianyar (1): scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check koshyaji (1): scsi: smartpqi: add inquiry timeouts peter chang (6): scsi: pm80xx: Do not request 12G sas speeds scsi: pm80xx: Cleanup command when a reset times out scsi: pm80xx: Fix command issue sizing scsi: pm80xx: Squashed logging cleanup changes scsi: pm80xx: Make phy enable completion as NULL scsi: pm80xx: Fix for SATA device discovery zhengbin (2): scsi: megaraid_sas: remove unused variables 'debugBlk','fusion' scsi: lpfc: Make function lpfc_defer_pt2pt_acc static And the diffstat: .../devicetree/bindings/ufs/ti,j721e-ufs.yaml | 68 ++ .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 1 + Documentation/scsi/scsi_mid_low_api.txt | 3 +- MAINTAINERS | 2 +- drivers/ata/pata_arasan_cf.c | 1 - drivers/s390/scsi/Makefile | 2 +- drivers/s390/scsi/zfcp_aux.c | 12 +- drivers/s390/scsi/zfcp_dbf.c | 8 +- drivers/s390/scsi/zfcp_def.h | 4 +- drivers/s390/scsi/zfcp_diag.c | 305 +++++++ drivers/s390/scsi/zfcp_diag.h | 101 +++ drivers/s390/scsi/zfcp_erp.c | 4 +- drivers/s390/scsi/zfcp_ext.h | 1 + drivers/s390/scsi/zfcp_fsf.c | 89 +- drivers/s390/scsi/zfcp_fsf.h | 21 +- drivers/s390/scsi/zfcp_scsi.c | 4 +- drivers/s390/scsi/zfcp_sysfs.c | 170 +++- drivers/scsi/NCR5380.c | 37 +- drivers/scsi/aacraid/aachba.c | 11 +- drivers/scsi/aacraid/aacraid.h | 23 +- drivers/scsi/aacraid/comminit.c | 5 + drivers/scsi/aacraid/commsup.c | 21 +- drivers/scsi/aacraid/linit.c | 35 +- drivers/scsi/aacraid/src.c | 10 + drivers/scsi/arcmsr/arcmsr_hba.c | 6 +- drivers/scsi/arm/acornscsi.c | 4 +- drivers/scsi/atari_scsi.c | 6 +- drivers/scsi/atp870u.c | 2 +- drivers/scsi/bfa/bfad.c | 3 +- drivers/scsi/bfa/bfad_attr.c | 4 +- drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h | 2 +- drivers/scsi/bnx2fc/bnx2fc_io.c | 31 +- drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +- drivers/scsi/csiostor/csio_hw.c | 20 +- drivers/scsi/csiostor/csio_init.c | 7 +- drivers/scsi/csiostor/csio_lnode.c | 18 +- drivers/scsi/csiostor/csio_mb.c | 2 +- drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 2 - drivers/scsi/cxgbi/libcxgbi.c | 28 - drivers/scsi/cxlflash/main.c | 2 - drivers/scsi/esas2r/esas2r_flash.c | 1 + drivers/scsi/fnic/fnic_scsi.c | 3 +- drivers/scsi/fnic/vnic_dev.c | 2 +- drivers/scsi/hisi_sas/hisi_sas.h | 67 +- drivers/scsi/hisi_sas/hisi_sas_main.c | 378 +++++--- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 6 +- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 13 +- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 30 +- drivers/scsi/hosts.c | 19 +- drivers/scsi/ips.c | 2 +- drivers/scsi/isci/port_config.c | 2 +- drivers/scsi/isci/remote_device.c | 2 +- drivers/scsi/iscsi_tcp.c | 8 + drivers/scsi/lpfc/lpfc.h | 40 +- drivers/scsi/lpfc/lpfc_attr.c | 298 +++++-- drivers/scsi/lpfc/lpfc_bsg.c | 18 +- drivers/scsi/lpfc/lpfc_crtn.h | 7 + drivers/scsi/lpfc/lpfc_ct.c | 28 +- drivers/scsi/lpfc/lpfc_debugfs.c | 118 ++- drivers/scsi/lpfc/lpfc_els.c | 57 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 200 +++-- drivers/scsi/lpfc/lpfc_hw4.h | 31 +- drivers/scsi/lpfc/lpfc_init.c | 954 ++++++++++++++++----- drivers/scsi/lpfc/lpfc_logmsg.h | 17 + drivers/scsi/lpfc/lpfc_mbox.c | 1 + drivers/scsi/lpfc/lpfc_mem.c | 3 - drivers/scsi/lpfc/lpfc_nportdisc.c | 149 +++- drivers/scsi/lpfc/lpfc_nvme.c | 85 +- drivers/scsi/lpfc/lpfc_nvmet.c | 103 +-- drivers/scsi/lpfc/lpfc_nvmet.h | 2 - drivers/scsi/lpfc/lpfc_scsi.c | 43 +- drivers/scsi/lpfc/lpfc_sli.c | 391 +++++++-- drivers/scsi/lpfc/lpfc_sli.h | 3 +- drivers/scsi/lpfc/lpfc_sli4.h | 42 +- drivers/scsi/lpfc/lpfc_version.h | 2 +- drivers/scsi/mac_scsi.c | 2 +- drivers/scsi/megaraid.c | 4 +- drivers/scsi/megaraid/megaraid_sas.h | 3 + drivers/scsi/megaraid/megaraid_sas_base.c | 8 +- drivers/scsi/megaraid/megaraid_sas_fp.c | 7 +- drivers/scsi/mpt3sas/mpt3sas_base.c | 36 +- drivers/scsi/mpt3sas/mpt3sas_base.h | 15 +- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 344 +++++++- drivers/scsi/mpt3sas/mpt3sas_ctl.h | 9 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +- drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c | 12 +- drivers/scsi/mvsas/mv_sas.c | 2 +- drivers/scsi/ncr53c8xx.c | 2 +- drivers/scsi/nsp32.c | 2 +- drivers/scsi/pcmcia/Kconfig | 2 +- drivers/scsi/pcmcia/nsp_cs.c | 2 - drivers/scsi/pm8001/pm8001_ctl.c | 20 + drivers/scsi/pm8001/pm8001_hwi.c | 131 ++- drivers/scsi/pm8001/pm8001_init.c | 36 +- drivers/scsi/pm8001/pm8001_sas.c | 70 +- drivers/scsi/pm8001/pm8001_sas.h | 24 +- drivers/scsi/pm8001/pm80xx_hwi.c | 451 +++++++--- drivers/scsi/pm8001/pm80xx_hwi.h | 3 + drivers/scsi/qedf/qedf_dbg.h | 2 +- drivers/scsi/qedf/qedf_main.c | 10 +- drivers/scsi/qedi/qedi_dbg.h | 2 +- drivers/scsi/qla2xxx/qla_attr.c | 6 +- drivers/scsi/qla2xxx/qla_def.h | 38 +- drivers/scsi/qla2xxx/qla_fw.h | 2 + drivers/scsi/qla2xxx/qla_gbl.h | 1 + drivers/scsi/qla2xxx/qla_gs.c | 69 +- drivers/scsi/qla2xxx/qla_init.c | 197 +++-- drivers/scsi/qla2xxx/qla_inline.h | 12 + drivers/scsi/qla2xxx/qla_iocb.c | 113 ++- drivers/scsi/qla2xxx/qla_isr.c | 38 +- drivers/scsi/qla2xxx/qla_mbx.c | 38 +- drivers/scsi/qla2xxx/qla_mid.c | 43 +- drivers/scsi/qla2xxx/qla_nvme.c | 4 +- drivers/scsi/qla2xxx/qla_os.c | 190 ++-- drivers/scsi/qla2xxx/qla_target.c | 28 +- drivers/scsi/qla2xxx/qla_tmpl.c | 29 +- drivers/scsi/qla2xxx/qla_version.h | 2 +- drivers/scsi/qla4xxx/ql4_mbx.c | 3 - drivers/scsi/scsi.c | 6 +- drivers/scsi/scsi_debug.c | 9 +- drivers/scsi/scsi_error.c | 3 + drivers/scsi/scsi_lib.c | 45 +- drivers/scsi/scsi_logging.c | 10 +- drivers/scsi/scsi_priv.h | 2 +- drivers/scsi/scsi_sysfs.c | 22 +- drivers/scsi/scsi_trace.c | 124 +-- drivers/scsi/sd.c | 7 +- drivers/scsi/sg.c | 98 +-- drivers/scsi/smartpqi/smartpqi.h | 77 +- drivers/scsi/smartpqi/smartpqi_init.c | 437 ++++++---- drivers/scsi/smartpqi/smartpqi_sas_transport.c | 22 +- drivers/scsi/storvsc_drv.c | 3 +- drivers/scsi/sun3_scsi.c | 4 +- drivers/scsi/ufs/Kconfig | 10 + drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/ti-j721e-ufs.c | 90 ++ drivers/scsi/ufs/ufs-hisi.c | 5 +- drivers/scsi/ufs/ufs-mediatek.c | 3 + drivers/scsi/ufs/ufs-qcom.c | 53 ++ drivers/scsi/ufs/ufs-qcom.h | 3 + drivers/scsi/ufs/ufs-sysfs.c | 15 +- drivers/scsi/ufs/ufs_bsg.c | 1 + drivers/scsi/ufs/ufshcd-dwc.c | 2 +- drivers/scsi/ufs/ufshcd-pltfrm.c | 1 - drivers/scsi/ufs/ufshcd.c | 217 +++-- drivers/scsi/ufs/ufshcd.h | 12 + drivers/scsi/ufs/ufshci.h | 2 +- drivers/scsi/zorro_esp.c | 11 +- drivers/target/iscsi/cxgbit/cxgbit_ddp.c | 3 - drivers/target/iscsi/iscsi_target.c | 24 +- drivers/target/iscsi/iscsi_target_auth.c | 232 +++-- drivers/target/iscsi/iscsi_target_auth.h | 17 +- drivers/target/iscsi/iscsi_target_parameters.h | 3 - drivers/target/target_core_fabric_lib.c | 2 +- drivers/target/target_core_tpg.c | 12 - drivers/target/target_core_transport.c | 28 + drivers/target/target_core_user.c | 6 +- drivers/target/target_core_xcopy.c | 1 - drivers/usb/storage/ene_ub6250.c | 2 +- drivers/usb/storage/transport.c | 3 +- drivers/usb/storage/uas.c | 1 - include/scsi/iscsi_proto.h | 1 + include/scsi/scsi_cmnd.h | 5 +- include/scsi/scsi_device.h | 5 +- include/scsi/scsi_eh.h | 1 + include/scsi/scsi_host.h | 19 +- include/target/target_core_base.h | 1 - include/uapi/linux/chio.h | 11 +- 168 files changed, 5830 insertions(+), 2060 deletions(-) create mode 100644 Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml create mode 100644 drivers/s390/scsi/zfcp_diag.c create mode 100644 drivers/s390/scsi/zfcp_diag.h create mode 100644 drivers/scsi/ufs/ti-j721e-ufs.c James
