Re: [PATCH 7/8] qla2xxx: Fix device connect issues in P2P configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2019-11-05 at 07:06 -0800, Himanshu Madhani wrote:
> From: Arun Easi <aeasi@xxxxxxxxxxx>
> 
> P2P need to take the alternate plogi route.
> 
> Signed-off-by: Arun Easi <aeasi@xxxxxxxxxxx>
> Signed-off-by: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
> ---
>  drivers/scsi/qla2xxx/qla_gbl.h  | 1 +
>  drivers/scsi/qla2xxx/qla_init.c | 9 +++++++++
>  drivers/scsi/qla2xxx/qla_iocb.c | 5 ++---
>  3 files changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
> index d11416dcee4e..5b163ad85c34 100644
> --- a/drivers/scsi/qla2xxx/qla_gbl.h
> +++ b/drivers/scsi/qla2xxx/qla_gbl.h
> @@ -917,4 +917,5 @@ int qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode);
>  
>  /* nvme.c */
>  void qla_nvme_unregister_remote_port(struct fc_port *fcport);
> +void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea);
>  #endif /* _QLA_GBL_H */
> diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
> index ff4528702b4e..6bb4ddd90b6e 100644
> --- a/drivers/scsi/qla2xxx/qla_init.c
> +++ b/drivers/scsi/qla2xxx/qla_init.c
> @@ -1717,6 +1717,15 @@ void qla24xx_handle_relogin_event(scsi_qla_host_t *vha,
>  	qla24xx_fcport_handle_login(vha, fcport);
>  }
>  
> +void qla_handle_els_plogi_done(scsi_qla_host_t *vha,
> +				      struct event_arg *ea)
> +{
> +	ql_dbg(ql_dbg_disc, vha, 0x2118,
> +	    "%s %d %8phC post PRLI\n",
> +	    __func__, __LINE__, ea->fcport->port_name);
> +	qla24xx_post_prli_work(vha, ea->fcport);
> +}
> +
>  /*
>   * RSCN(s) came in for this fcport, but the RSCN(s) was not able
>   * to be consumed by the fcport
> diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
> index 2b675da34bda..b25f87ff8cde 100644
> --- a/drivers/scsi/qla2xxx/qla_iocb.c
> +++ b/drivers/scsi/qla2xxx/qla_iocb.c
> @@ -2760,9 +2760,8 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
>  		case CS_COMPLETE:
>  			memset(&ea, 0, sizeof(ea));
>  			ea.fcport = fcport;
> -			ea.data[0] = MBS_COMMAND_COMPLETE;
> -			ea.sp = sp;
> -			qla24xx_handle_plogi_done_event(vha, &ea);
> +			ea.rc = res;
> +			qla_handle_els_plogi_done(vha, &ea);
>  			break;
>  
>  		case CS_IOCB_ERROR:

Reviewed-by: Ewan D. Milne <emilne@xxxxxxxxxx>





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux