[PATCH 04/11] lpfc: Fix unexpected error messages during RSCN handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



During heavy RCN activity and log_verbose = 0 we see these messages:
2754 PRLI failure DID:521245 Status:x9/xb2c00, data: x0
0231 RSCN timeout Data: x0 x3
0230 Unexpected timeout, hba link state x5

This is due to delayed RSCN activity.

Correct by avoiding the timeout thus the messages by resetarting
the discovery timeout whenever an rscn is received.

Filter PRLI responses such that severity depends on whether expected for
the configuration or not. For example, PRLI errors on a fabric will be
informational (they are expected), but Point-to-Point errors are not
necessarily expected so they are raised to an error level.

Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_els.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 9a1b7f331718..9a570c15b2a1 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2236,6 +2236,7 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	IOCB_t *irsp;
 	struct lpfc_nodelist *ndlp;
+	char *mode;
 
 	/* we pass cmdiocb to state machine which needs rspiocb as well */
 	cmdiocb->context_un.rsp_iocb = rspiocb;
@@ -2273,8 +2274,17 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			goto out;
 		}
 
+		/* If we don't send GFT_ID to Fabric, a PRLI error
+		 * could be expected.
+		 */
+		if ((vport->fc_flag & FC_FABRIC) ||
+		    (vport->cfg_enable_fc4_type != LPFC_ENABLE_BOTH))
+			mode = KERN_ERR;
+		else
+			mode = KERN_INFO;
+
 		/* PRLI failed */
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+		lpfc_printf_vlog(vport, mode, LOG_ELS,
 				 "2754 PRLI failure DID:%06X Status:x%x/x%x, "
 				 "data: x%x\n",
 				 ndlp->nlp_DID, irsp->ulpStatus,
@@ -6465,7 +6475,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 	uint32_t payload_len, length, nportid, *cmd;
 	int rscn_cnt;
 	int rscn_id = 0, hba_id = 0;
-	int i;
+	int i, tmo;
 
 	pcmd = (struct lpfc_dmabuf *) cmdiocb->context2;
 	lp = (uint32_t *) pcmd->virt;
@@ -6571,6 +6581,13 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 
 		spin_lock_irq(shost->host_lock);
 		vport->fc_flag |= FC_RSCN_DEFERRED;
+
+		/* Restart disctmo if its already running */
+		if (vport->fc_flag & FC_DISC_TMO) {
+			tmo = ((phba->fc_ratov * 3) + 3);
+			mod_timer(&vport->fc_disctmo,
+				  jiffies + msecs_to_jiffies(1000 * tmo));
+		}
 		if ((rscn_cnt < FC_MAX_HOLD_RSCN) &&
 		    !(vport->fc_flag & FC_RSCN_DISCOVERY)) {
 			vport->fc_flag |= FC_RSCN_MODE;
-- 
2.13.7




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux