[PATCH 03/24] wd33c93: use SCSI status

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use standard SCSI status and drop usage of the linux-specific ones.

Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
 drivers/scsi/wd33c93.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index f81046f0e68a..76143a68f55c 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -1176,7 +1176,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 			if (cmd->SCp.Status == ILLEGAL_STATUS_BYTE)
 				cmd->SCp.Status = lun;
 			if (cmd->cmnd[0] == REQUEST_SENSE
-			    && cmd->SCp.Status != GOOD)
+			    && cmd->SCp.Status != SAM_STAT_GOOD)
 				cmd->result =
 				    (cmd->
 				     result & 0x00ffff) | (DID_ERROR << 16);
@@ -1262,7 +1262,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 		    hostdata->connected = NULL;
 		hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xff));
 		hostdata->state = S_UNCONNECTED;
-		if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != GOOD)
+		if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != SAM_STAT_GOOD)
 			cmd->result =
 			    (cmd->result & 0x00ffff) | (DID_ERROR << 16);
 		else
@@ -1296,7 +1296,7 @@ wd33c93_intr(struct Scsi_Host *instance)
 			hostdata->state = S_UNCONNECTED;
 			DB(DB_INTR, printk(":%d", cmd->SCp.Status))
 			    if (cmd->cmnd[0] == REQUEST_SENSE
-				&& cmd->SCp.Status != GOOD)
+				&& cmd->SCp.Status != SAM_STAT_GOOD)
 				cmd->result =
 				    (cmd->
 				     result & 0x00ffff) | (DID_ERROR << 16);
-- 
2.16.4




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux