· Alexander Jolk <alexj@xxxxxxx> wrote: > I have successfully used your procedure in order to get an HP LTO-3 > driver to work that's attached to an LSI/Fusion/MPT controller. That > would seem to point to the drive or the scsi driver rather than the > controller. My initial (private) mail didn't contain any specific hardware versions. So if it helps to track down the reason for the negotiation problem, here they are: LTO tape: Host: scsi2 Channel: 00 Id: 06 Lun: 00 Vendor: CERTANCE Model: ULTRIUM 2 Rev: 1823 Type: Sequential-Access ANSI SCSI revision: 03 Controller: Adaptec AIC79xx driver version: 1.3.11 Adaptec AIC7902 Ultra320 SCSI adapter aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs Raymond - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
