Re: [PATCH] Add prctl support for controlling PF_MEMALLOC V2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 21-10-19 16:41:37, Mike Christie wrote:
> There are several storage drivers like dm-multipath, iscsi, tcmu-runner,
> amd nbd that have userspace components that can run in the IO path. For
> example, iscsi and nbd's userspace deamons may need to recreate a socket
> and/or send IO on it, and dm-multipath's daemon multipathd may need to
> send IO to figure out the state of paths and re-set them up.
> 
> In the kernel these drivers have access to GFP_NOIO/GFP_NOFS and the
> memalloc_*_save/restore functions to control the allocation behavior,
> but for userspace we would end up hitting a allocation that ended up
> writing data back to the same device we are trying to allocate for.

Which code paths are we talking about here? Any ioctl or is this a
general syscall path? Can we mark the process in a more generic way?
E.g. we have PF_LESS_THROTTLE (used by nfsd). It doesn't affect the
reclaim recursion but it shows a pattern that doesn't really exhibit
too many internals. Maybe we need PF_IO_FLUSHER or similar?

> This patch allows the userspace deamon to set the PF_MEMALLOC* flags
> with prctl during their initialization so later allocations cannot
> calling back into them.

TBH I am not really happy to export these to the userspace. They are
an internal implementation detail and the userspace shouldn't really
care. So if this is really necessary then we need a very good argumnets
and documentation to make the usage clear.
 
> Signed-off-by: Mike Christie <mchristi@xxxxxxxxxx>
> ---
> 
> V2:
> - Use prctl instead of procfs.
> - Add support for NOFS for fuse.
> - Check permissions.
> 
>  include/uapi/linux/prctl.h |  8 +++++++
>  kernel/sys.c               | 44 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 52 insertions(+)
> 
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index 7da1b37b27aa..6f6b3af6633a 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -234,4 +234,12 @@ struct prctl_mm_map {
>  #define PR_GET_TAGGED_ADDR_CTRL		56
>  # define PR_TAGGED_ADDR_ENABLE		(1UL << 0)
>  
> +/* Control reclaim behavior when allocating memory */
> +#define PR_SET_MEMALLOC			57
> +#define PR_GET_MEMALLOC			58
> +#define PR_MEMALLOC_SET_NOIO		(1UL << 0)
> +#define PR_MEMALLOC_CLEAR_NOIO		(1UL << 1)
> +#define PR_MEMALLOC_SET_NOFS		(1UL << 2)
> +#define PR_MEMALLOC_CLEAR_NOFS		(1UL << 3)
> +
>  #endif /* _LINUX_PRCTL_H */
> diff --git a/kernel/sys.c b/kernel/sys.c
> index a611d1d58c7d..34fedc9fc7e4 100644
> --- a/kernel/sys.c
> +++ b/kernel/sys.c
> @@ -2486,6 +2486,50 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
>  			return -EINVAL;
>  		error = GET_TAGGED_ADDR_CTRL();
>  		break;
> +	case PR_SET_MEMALLOC:
> +		if (!capable(CAP_SYS_ADMIN))
> +			return -EPERM;
> +
> +		if (arg3 || arg4 || arg5)
> +			return -EINVAL;
> +
> +		switch (arg2) {
> +		case PR_MEMALLOC_SET_NOIO:
> +			if (current->flags & PF_MEMALLOC_NOFS)
> +				return -EINVAL;
> +
> +			current->flags |= PF_MEMALLOC_NOIO;
> +			break;
> +		case PR_MEMALLOC_CLEAR_NOIO:
> +			current->flags &= ~PF_MEMALLOC_NOIO;
> +			break;
> +		case PR_MEMALLOC_SET_NOFS:
> +			if (current->flags & PF_MEMALLOC_NOIO)
> +				return -EINVAL;
> +
> +			current->flags |= PF_MEMALLOC_NOFS;
> +			break;
> +		case PR_MEMALLOC_CLEAR_NOFS:
> +			current->flags &= ~PF_MEMALLOC_NOFS;
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +		break;
> +	case PR_GET_MEMALLOC:
> +		if (!capable(CAP_SYS_ADMIN))
> +			return -EPERM;
> +
> +		if (arg2 || arg3 || arg4 || arg5)
> +			return -EINVAL;
> +
> +		if (current->flags & PF_MEMALLOC_NOIO)
> +			error = PR_MEMALLOC_SET_NOIO;
> +		else if (current->flags & PF_MEMALLOC_NOFS)
> +			error = PR_MEMALLOC_SET_NOFS;
> +		else
> +			error = 0;
> +		break;
>  	default:
>  		error = -EINVAL;
>  		break;
> -- 
> 2.20.1
> 

-- 
Michal Hocko
SUSE Labs



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux