From: Randy Dunlap <randy.dunlap@xxxxxxxxxx> Building CCISS SCSI tape support in-kernel when SCSI=m causes build errors, so require SCSI support to be =y or same as CCISS SCSI tape support. drivers/built-in.o: In function `cciss_remove_one': cciss.c:(.text+0x79d4c): undefined reference to `scsi_remove_host' cciss.c:(.text+0x79d55): undefined reference to `scsi_host_put' drivers/built-in.o: In function `cciss_update_non_disk_devices': cciss.c:(.text+0x7bb54): undefined reference to `scsi_device_type' cciss.c:(.text+0x7bcc8): undefined reference to `scsi_device_type' cciss.c:(.text+0x7be81): undefined reference to `scsi_device_type' cciss.c:(.text+0x7bf81): undefined reference to `scsi_device_type' drivers/built-in.o: In function `cciss_proc_write': cciss.c:(.text+0x7c175): undefined reference to `scsi_host_alloc' cciss.c:(.text+0x7c1ed): undefined reference to `scsi_add_host' cciss.c:(.text+0x7c1f9): undefined reference to `scsi_scan_host' cciss.c:(.text+0x7c206): undefined reference to `scsi_host_put' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@xxxxxxxxxx> --- drivers/block/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- linux-2619-rc6g3.orig/drivers/block/Kconfig +++ linux-2619-rc6g3/drivers/block/Kconfig @@ -168,7 +168,8 @@ config BLK_CPQ_CISS_DA config CISS_SCSI_TAPE bool "SCSI tape drive support for Smart Array 5xxx" - depends on BLK_CPQ_CISS_DA && SCSI && PROC_FS + depends on BLK_CPQ_CISS_DA && PROC_FS + depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA help When enabled (Y), this option allows SCSI tape drives and SCSI medium changers (tape robots) to be accessed via a Compaq 5xxx array --- - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
