Re: [PATCH 2/6] qla2xxx: Fix flash read for Qlogic ISPs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2019-08-30 at 15:23 -0700, Himanshu Madhani wrote:
> From: Quinn Tran <qutran@xxxxxxxxxxx>
> 
> Use adapter specific callback to read flash instead of ISP
> adapter specific.
> 
> Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
> Signed-off-by: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
> ---
>  drivers/scsi/qla2xxx/qla_init.c | 4 ++--
>  drivers/scsi/qla2xxx/qla_nx.c   | 1 +
>  drivers/scsi/qla2xxx/qla_sup.c  | 8 ++++----
>  3 files changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
> index 632130b6165d..8161f08f3a4d 100644
> --- a/drivers/scsi/qla2xxx/qla_init.c
> +++ b/drivers/scsi/qla2xxx/qla_init.c
> @@ -8229,7 +8229,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
>  		    active_regions.aux.vpd_nvram == QLA27XX_PRIMARY_IMAGE ?
>  		    "primary" : "secondary");
>  	}
> -	qla24xx_read_flash_data(vha, ha->vpd, faddr, ha->vpd_size >> 2);
> +	ha->isp_ops->read_optrom(vha, ha->vpd, faddr << 2, ha->vpd_size);
>  
>  	/* Get NVRAM data into cache and calculate checksum. */
>  	faddr = ha->flt_region_nvram;
> @@ -8241,7 +8241,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
>  	    "Loading %s nvram image.\n",
>  	    active_regions.aux.vpd_nvram == QLA27XX_PRIMARY_IMAGE ?
>  	    "primary" : "secondary");
> -	qla24xx_read_flash_data(vha, ha->nvram, faddr, ha->nvram_size >> 2);
> +	ha->isp_ops->read_optrom(vha, ha->nvram, faddr << 2, ha->nvram_size);
>  
>  	dptr = (uint32_t *)nv;
>  	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++, dptr++)
> diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
> index 65a675906188..a79f8da38abe 100644
> --- a/drivers/scsi/qla2xxx/qla_nx.c
> +++ b/drivers/scsi/qla2xxx/qla_nx.c
> @@ -2288,6 +2288,7 @@ qla82xx_disable_intrs(struct qla_hw_data *ha)
>  	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
>  
>  	qla82xx_mbx_intr_disable(vha);
> +
>  	spin_lock_irq(&ha->hardware_lock);
>  	if (IS_QLA8044(ha))
>  		qla8044_wr_reg(ha, LEG_INTR_MASK_OFFSET, 1);
> diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
> index 764e1bb0f695..f2d5115b2d8d 100644
> --- a/drivers/scsi/qla2xxx/qla_sup.c
> +++ b/drivers/scsi/qla2xxx/qla_sup.c
> @@ -682,8 +682,8 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
>  
>  	ha->flt_region_flt = flt_addr;
>  	wptr = (uint16_t *)ha->flt;
> -	qla24xx_read_flash_data(vha, (void *)flt, flt_addr,
> -	    (sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE) >> 2);
> +	ha->isp_ops->read_optrom(vha, (void *)flt, flt_addr << 2,
> +	    (sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE));
>  
>  	if (le16_to_cpu(*wptr) == 0xffff)
>  		goto no_flash_data;
> @@ -950,11 +950,11 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
>  	struct req_que *req = ha->req_q_map[0];
>  	uint16_t cnt, chksum;
>  	uint16_t *wptr = (void *)req->ring;
> -	struct qla_fdt_layout *fdt = (void *)req->ring;
> +	struct qla_fdt_layout *fdt = (struct qla_fdt_layout *)req->ring;
>  	uint8_t	man_id, flash_id;
>  	uint16_t mid = 0, fid = 0;
>  
> -	qla24xx_read_flash_data(vha, (void *)fdt, ha->flt_region_fdt,
> +	ha->isp_ops->read_optrom(vha, fdt, ha->flt_region_fdt << 2,
>  	    OPTROM_BURST_DWORDS);
>  	if (le16_to_cpu(*wptr) == 0xffff)
>  		goto no_flash_data;

Reviewed-by: Ewan D. Milne <emilne@xxxxxxxxxx>




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux