[PATCH] mpt3sas: Add sysfs parameter to set sdev qd to host can_queue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch provides the module parameter and sysfs interface
named 'enable_sdev_max_qd' to switch between the driver provided
(optimal)queue depth and controller queue depth (can_queue).

When 'enable_sdev_max_qd' is set to one then all the device's queue depth
is set to shost's can_queue value. When this sysfs is reset to zero then
all the devices queue depth is set to corresponding device type's default
(i.e. optimal) value defined by the driver.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpt3sas_base.h  |   2 +
 drivers/scsi/mpt3sas/mpt3sas_ctl.c   | 102 +++++++++++++++++++++++++++++++++++
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |  40 ++++++++++++--
 3 files changed, 140 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 745e0e1..faca0a5 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1232,6 +1232,7 @@ struct MPT3SAS_ADAPTER {
 	u16		thresh_hold;
 	u8		high_iops_queues;
 	u32		drv_support_bitmap;
+	bool		enable_sdev_max_qd;
 
 	/* internal commands, callback index */
 	u8		scsi_io_cb_idx;
@@ -1587,6 +1588,7 @@ struct _pcie_device *mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
 void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
 struct _raid_device *
 mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
 
 /* config shared API */
 u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index da29005..7d69695 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -3400,6 +3400,107 @@ drv_support_bitmap_show(struct device *cdev,
 }
 static DEVICE_ATTR_RO(drv_support_bitmap);
 
+/**
+ * enable_sdev_max_qd_show - display whether sdev max qd is enabled/disabled
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs read/write shost attribute. This attribute is used to set the
+ * targets queue depth to HBA IO queue depth if this attribute is enabled.
+ */
+static ssize_t
+enable_sdev_max_qd_show(struct device *cdev,
+	struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ioc->enable_sdev_max_qd);
+}
+
+/**
+ * enable_sdev_max_qd_store - Enable/disable sdev max qd
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * A sysfs read/write shost attribute. This attribute is used to set the
+ * targets queue depth to HBA IO queue depth if this attribute is enabled.
+ * If this attribute is disabled then targets will have corresponding default
+ * queue depth.
+ */
+static ssize_t
+enable_sdev_max_qd_store(struct device *cdev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(cdev);
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+	struct MPT3SAS_DEVICE *sas_device_priv_data;
+	struct MPT3SAS_TARGET *sas_target_priv_data;
+	int val = 0;
+	struct scsi_device *sdev;
+	struct _raid_device *raid_device;
+	int qdepth;
+
+	if (kstrtoint(buf, 0, &val) != 0)
+		return -EINVAL;
+
+	switch (val) {
+	case 0:
+		ioc->enable_sdev_max_qd = 0;
+		shost_for_each_device(sdev, ioc->shost) {
+			sas_device_priv_data = sdev->hostdata;
+			if (!sas_device_priv_data)
+				continue;
+			sas_target_priv_data = sas_device_priv_data->sas_target;
+			if (!sas_target_priv_data)
+				continue;
+
+			if (sas_target_priv_data->flags &
+			    MPT_TARGET_FLAGS_VOLUME) {
+				raid_device =
+				    mpt3sas_raid_device_find_by_handle(ioc,
+				    sas_target_priv_data->handle);
+
+				switch (raid_device->volume_type) {
+				case MPI2_RAID_VOL_TYPE_RAID0:
+					if (raid_device->device_info &
+					    MPI2_SAS_DEVICE_INFO_SSP_TARGET)
+						qdepth =
+						    MPT3SAS_SAS_QUEUE_DEPTH;
+					else
+						qdepth =
+						    MPT3SAS_SATA_QUEUE_DEPTH;
+					break;
+				case MPI2_RAID_VOL_TYPE_RAID1E:
+				case MPI2_RAID_VOL_TYPE_RAID1:
+				case MPI2_RAID_VOL_TYPE_RAID10:
+				case MPI2_RAID_VOL_TYPE_UNKNOWN:
+				default:
+					qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
+				}
+			} else if (sas_target_priv_data->flags &
+			    MPT_TARGET_FLAGS_PCIE_DEVICE)
+				qdepth = MPT3SAS_NVME_QUEUE_DEPTH;
+			else
+				qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
+
+			mpt3sas_scsih_change_queue_depth(sdev, qdepth);
+		}
+		break;
+	case 1:
+		ioc->enable_sdev_max_qd = 1;
+		shost_for_each_device(sdev, ioc->shost)
+			mpt3sas_scsih_change_queue_depth(sdev,
+			    shost->can_queue);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return strlen(buf);
+}
+static DEVICE_ATTR_RW(enable_sdev_max_qd);
+
 struct device_attribute *mpt3sas_host_attrs[] = {
 	&dev_attr_version_fw,
 	&dev_attr_version_bios,
@@ -3427,6 +3528,7 @@ struct device_attribute *mpt3sas_host_attrs[] = {
 	&dev_attr_diag_trigger_mpi,
 	&dev_attr_drv_support_bitmap,
 	&dev_attr_BRM_status,
+	&dev_attr_enable_sdev_max_qd,
 	NULL,
 };
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 9904775..d0c2f8d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -155,6 +155,10 @@ static int prot_mask = -1;
 module_param(prot_mask, int, 0444);
 MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
 
+static bool enable_sdev_max_qd;
+module_param(enable_sdev_max_qd, bool, 0444);
+MODULE_PARM_DESC(enable_sdev_max_qd,
+	"Enable sdev max qd as can_queue, def=disabled(0)");
 
 /* raid transport support */
 static struct raid_template *mpt3sas_raid_template;
@@ -1519,7 +1523,13 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 
 	max_depth = shost->can_queue;
 
-	/* limit max device queue for SATA to 32 */
+	/*
+	 * limit max device queue for SATA to 32 if enable_sdev_max_qd
+	 * is disabled.
+	 */
+	if (ioc->enable_sdev_max_qd)
+		goto not_sata;
+
 	sas_device_priv_data = sdev->hostdata;
 	if (!sas_device_priv_data)
 		goto not_sata;
@@ -1549,6 +1559,25 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
 }
 
 /**
+ * mpt3sas_scsih_change_queue_depth - setting device queue depth
+ * @sdev: scsi device struct
+ * @qdepth: requested queue depth
+ *
+ * Returns nothing.
+ */
+void
+mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+	struct Scsi_Host *shost = sdev->host;
+	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+
+	if (ioc->enable_sdev_max_qd)
+		qdepth = shost->can_queue;
+
+	scsih_change_queue_depth(sdev, qdepth);
+}
+
+/**
  * scsih_target_alloc - target add routine
  * @starget: scsi target struct
  *
@@ -2306,7 +2335,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 						MPT3SAS_RAID_MAX_SECTORS);
 		}
 
-		scsih_change_queue_depth(sdev, qdepth);
+		mpt3sas_scsih_change_queue_depth(sdev, qdepth);
 
 		/* raid transport support */
 		if (!ioc->is_warpdrive)
@@ -2370,7 +2399,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 
 		pcie_device_put(pcie_device);
 		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
-		scsih_change_queue_depth(sdev, qdepth);
+		mpt3sas_scsih_change_queue_depth(sdev, qdepth);
 		/* Enable QUEUE_FLAG_NOMERGES flag, so that IOs won't be
 		 ** merged and can eliminate holes created during merging
 		 ** operation.
@@ -2430,7 +2459,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 		_scsih_display_sata_capabilities(ioc, handle, sdev);
 
 
-	scsih_change_queue_depth(sdev, qdepth);
+	mpt3sas_scsih_change_queue_depth(sdev, qdepth);
 
 	if (ssp_target) {
 		sas_read_port_mode_page(sdev);
@@ -10507,6 +10536,9 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	 * Enable MEMORY MOVE support flag.
 	 */
 	ioc->drv_support_bitmap |= MPT_DRV_SUPPORT_BITMAP_MEMMOVE;
+
+	ioc->enable_sdev_max_qd = enable_sdev_max_qd;
+
 	/* misc semaphores and spin locks */
 	mutex_init(&ioc->reset_in_progress_mutex);
 	/* initializing pci_access_mutex lock */
-- 
1.8.3.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux