Some remote ports may be slow in registering their GID_FT
protocol information with the fabric. If the remote port is
an initiator, it may send PLOGI to the port before the GID_FT
logic is complete. Meaning, after accepting the PLOGI, when the
driver may see no response to the GID_FT that is issued after
the login to determine the protocols supported so that proper
PRLI's may be transmit. If the driver has no fc4 information,
it currently stops and the remote port is not discovered.
Fix by issuing a LOGO when there is no GID_FT information.
The LOGO completion handling will attempt to re-login if the
nport_id is still present.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_ct.c | 16 +++++++++++++++-
drivers/scsi/lpfc/lpfc_nportdisc.c | 6 +++++-
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 3246942ff2ff..c2ac6cb730e8 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1215,12 +1215,26 @@ lpfc_cmpl_ct_cmd_gft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
FC_TYPE_FCP, FC_TYPE_NVME,
ndlp->nlp_state);
- if (ndlp->nlp_state == NLP_STE_REG_LOGIN_ISSUE) {
+ if (ndlp->nlp_state == NLP_STE_REG_LOGIN_ISSUE &&
+ ndlp->nlp_fc4_type) {
ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
lpfc_nlp_set_state(vport, ndlp,
NLP_STE_PRLI_ISSUE);
lpfc_issue_els_prli(vport, ndlp, 0);
+ } else if (!ndlp->nlp_fc4_type) {
+ /* If fc4 type is still unknown, then LOGO */
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_DISCOVERY,
+ "6443 Sending LOGO ndlp x%px,"
+ "DID x%06x with fc4_type: "
+ "x%08x, state: %d\n",
+ ndlp, did, ndlp->nlp_fc4_type,
+ ndlp->nlp_state);
+ lpfc_issue_els_logo(vport, ndlp, 0);
+ ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
+ lpfc_nlp_set_state(vport, ndlp,
+ NLP_STE_NPR_NODE);
}
}
} else
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index c58000cd744f..d76d76081d1a 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1822,7 +1822,11 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_PRLI_ISSUE);
- lpfc_issue_els_prli(vport, ndlp, 0);
+ if (lpfc_issue_els_prli(vport, ndlp, 0)) {
+ lpfc_issue_els_logo(vport, ndlp, 0);
+ ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+ }
} else {
if ((vport->fc_flag & FC_PT2PT) && phba->nvmet_support)
phba->targetport->port_id = vport->fc_myDID;
--
2.13.7
