[PATCH AUTOSEL 4.19 36/42] scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hannes Reinecke <hare@xxxxxxx>

[ Upstream commit 20122994e38aef0ae50555884d287adde6641c94 ]

Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying.  So
ensure the default delay is applied before retrying.

Signed-off-by: Hannes Reinecke <hare@xxxxxxxx>
Tested-by: Zhangguanghui <zhang.guanghui@xxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index d1154baa9436a..9c21938ed67ed 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -54,6 +54,7 @@
 #define ALUA_FAILOVER_TIMEOUT		60
 #define ALUA_FAILOVER_RETRIES		5
 #define ALUA_RTPG_DELAY_MSECS		5
+#define ALUA_RTPG_RETRY_DELAY		2
 
 /* device handler flags */
 #define ALUA_OPTIMIZE_STPG		0x01
@@ -696,7 +697,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
 	case SCSI_ACCESS_STATE_TRANSITIONING:
 		if (time_before(jiffies, pg->expiry)) {
 			/* State transition, retry */
-			pg->interval = 2;
+			pg->interval = ALUA_RTPG_RETRY_DELAY;
 			err = SCSI_DH_RETRY;
 		} else {
 			struct alua_dh_data *h;
@@ -821,6 +822,8 @@ static void alua_rtpg_work(struct work_struct *work)
 				spin_lock_irqsave(&pg->lock, flags);
 				pg->flags &= ~ALUA_PG_RUNNING;
 				pg->flags |= ALUA_PG_RUN_RTPG;
+				if (!pg->interval)
+					pg->interval = ALUA_RTPG_RETRY_DELAY;
 				spin_unlock_irqrestore(&pg->lock, flags);
 				queue_delayed_work(kaluad_wq, &pg->rtpg_work,
 						   pg->interval * HZ);
@@ -832,6 +835,8 @@ static void alua_rtpg_work(struct work_struct *work)
 		spin_lock_irqsave(&pg->lock, flags);
 		if (err == SCSI_DH_RETRY || pg->flags & ALUA_PG_RUN_RTPG) {
 			pg->flags &= ~ALUA_PG_RUNNING;
+			if (!pg->interval && !(pg->flags & ALUA_PG_RUN_RTPG))
+				pg->interval = ALUA_RTPG_RETRY_DELAY;
 			pg->flags |= ALUA_PG_RUN_RTPG;
 			spin_unlock_irqrestore(&pg->lock, flags);
 			queue_delayed_work(kaluad_wq, &pg->rtpg_work,
-- 
2.20.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux