Configure CDNS_UFS_REG_HCLKDIV in .hce_enable_notify() instead of
.setup_clock() because if UFSHCD resets the controller ip because
of phy or device related errors then CDNS_UFS_REG_HCLKDIV is
reset to default value and .setup_clock() is not called later
in the sequence whereas .hce_enable_notify will be called everytime
controller is reenabled.
Signed-off-by: Anil Varughese <aniljoy@xxxxxxxxxxx>
---
drivers/scsi/ufs/cdns-pltfrm.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/scsi/ufs/cdns-pltfrm.c
index 86dbb723f..993519080 100644
--- a/drivers/scsi/ufs/cdns-pltfrm.c
+++ b/drivers/scsi/ufs/cdns-pltfrm.c
@@ -62,17 +62,16 @@ static int cdns_ufs_set_hclkdiv(struct ufs_hba *hba)
}
/**
- * Sets clocks used by the controller
+ * Called before and after HCE enable bit is set.
* @hba: host controller instance
- * @on: if true, enable clocks, otherwise disable
* @status: notify stage (pre, post change)
*
* Return zero for success and non-zero for failure
*/
-static int cdns_ufs_setup_clocks(struct ufs_hba *hba, bool on,
- enum ufs_notify_change_status status)
+static int cdns_ufs_hce_enable_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
{
- if ((!on) || (status == PRE_CHANGE))
+ if (status != PRE_CHANGE)
return 0;
return cdns_ufs_set_hclkdiv(hba);
@@ -114,13 +113,13 @@ static int cdns_ufs_m31_16nm_phy_initialization(struct ufs_hba *hba)
static const struct ufs_hba_variant_ops cdns_ufs_pltfm_hba_vops = {
.name = "cdns-ufs-pltfm",
- .setup_clocks = cdns_ufs_setup_clocks,
+ .hce_enable_notify = cdns_ufs_hce_enable_notify,
};
static const struct ufs_hba_variant_ops cdns_ufs_m31_16nm_pltfm_hba_vops = {
.name = "cdns-ufs-pltfm",
.init = cdns_ufs_init,
- .setup_clocks = cdns_ufs_setup_clocks,
+ .hce_enable_notify = cdns_ufs_hce_enable_notify,
.phy_initialization = cdns_ufs_m31_16nm_phy_initialization,
};
--
2.15.0
