According to the firmware documentation responder mode must be set for
ELS pass-through IOCBs if a response is expected.
Cc: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
Cc: Giridhar Malavali <gmalavali@xxxxxxxxxxx>
Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
---
drivers/scsi/qla2xxx/qla_iocb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index c7b91827c1e7..2da7c92e320b 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2700,9 +2700,9 @@ qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
els_iocb->s_id[0] = vha->d_id.b.al_pa;
els_iocb->s_id[1] = vha->d_id.b.area;
els_iocb->s_id[2] = vha->d_id.b.domain;
- els_iocb->control_flags = 0;
if (elsio->u.els_logo.els_cmd == ELS_DCMD_PLOGI) {
+ els_iocb->control_flags = 0;
els_iocb->tx_byte_count = els_iocb->tx_len =
cpu_to_le32(sizeof(struct els_plogi_payload));
put_unaligned_le64(elsio->u.els_plogi.els_plogi_pyld_dma,
@@ -2718,6 +2718,7 @@ qla24xx_els_logo_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
ql_dump_buffer(ql_log_info, vha, 0x0109,
(uint8_t *)els_iocb, 0x70);
} else {
+ els_iocb->control_flags = 1 << 13;
els_iocb->tx_byte_count =
cpu_to_le32(sizeof(struct els_logo_payload));
put_unaligned_le64(elsio->u.els_logo.els_logo_pyld_dma,
--
2.22.0.770.g0f2c4a37fd-goog
