[PATCH V2 3/4] scsi: implement REQ_OP_ZONE_RESET_ALL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch implements the zone reset all operation for sd_zbc.c. We add
a new boolean parameter for the sd_zbc_setup_reset_cmd() to indicate
REQ_OP_ZONE_RESET_ALL command setup. Along with that we add support in
the completion path for the zone reset all.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@xxxxxxx>
---
 drivers/scsi/sd.c     |  5 ++++-
 drivers/scsi/sd.h     |  5 +++--
 drivers/scsi/sd_zbc.c | 10 ++++++++--
 3 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a3406bd62391..42ef930c4df5 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1292,7 +1292,9 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 	case REQ_OP_WRITE:
 		return sd_setup_read_write_cmnd(cmd);
 	case REQ_OP_ZONE_RESET:
-		return sd_zbc_setup_reset_cmnd(cmd);
+		return sd_zbc_setup_reset_cmnd(cmd, false);
+	case REQ_OP_ZONE_RESET_ALL:
+		return sd_zbc_setup_reset_cmnd(cmd, true);
 	default:
 		WARN_ON_ONCE(1);
 		return BLK_STS_NOTSUPP;
@@ -1958,6 +1960,7 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	case REQ_OP_WRITE_ZEROES:
 	case REQ_OP_WRITE_SAME:
 	case REQ_OP_ZONE_RESET:
+	case REQ_OP_ZONE_RESET_ALL:
 		if (!result) {
 			good_bytes = blk_rq_bytes(req);
 			scsi_set_resid(SCpnt, 0);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 38c50946fc42..1eab779f812b 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -209,7 +209,7 @@ static inline int sd_is_zoned(struct scsi_disk *sdkp)
 
 extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
 extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
-extern blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd);
+extern blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd, bool all);
 extern void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 			    struct scsi_sense_hdr *sshdr);
 extern int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
@@ -225,7 +225,8 @@ static inline int sd_zbc_read_zones(struct scsi_disk *sdkp,
 
 static inline void sd_zbc_print_zones(struct scsi_disk *sdkp) {}
 
-static inline blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
+static inline blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd,
+						   bool all)
 {
 	return BLK_STS_TARGET;
 }
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index db16c19e05c4..c1c7140ea787 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -209,10 +209,11 @@ static inline sector_t sd_zbc_zone_sectors(struct scsi_disk *sdkp)
 /**
  * sd_zbc_setup_reset_cmnd - Prepare a RESET WRITE POINTER scsi command.
  * @cmd: the command to setup
+ * @all: Reset all zones control.
  *
  * Called from sd_init_command() for a REQ_OP_ZONE_RESET request.
  */
-blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
+blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd, bool all)
 {
 	struct request *rq = cmd->request;
 	struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
@@ -234,7 +235,10 @@ blk_status_t sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
 	memset(cmd->cmnd, 0, cmd->cmd_len);
 	cmd->cmnd[0] = ZBC_OUT;
 	cmd->cmnd[1] = ZO_RESET_WRITE_POINTER;
-	put_unaligned_be64(block, &cmd->cmnd[2]);
+	if (all)
+		cmd->cmnd[14] = 0x1;
+	else
+		put_unaligned_be64(block, &cmd->cmnd[2]);
 
 	rq->timeout = SD_TIMEOUT;
 	cmd->sc_data_direction = DMA_NONE;
@@ -261,6 +265,7 @@ void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
 
 	switch (req_op(rq)) {
 	case REQ_OP_ZONE_RESET:
+	case REQ_OP_ZONE_RESET_ALL:
 
 		if (result &&
 		    sshdr->sense_key == ILLEGAL_REQUEST &&
@@ -487,6 +492,7 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
 	/* The drive satisfies the kernel restrictions: set it up */
 	blk_queue_chunk_sectors(sdkp->disk->queue,
 			logical_to_sectors(sdkp->device, zone_blocks));
+	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, sdkp->disk->queue);
 	nr_zones = round_up(sdkp->capacity, zone_blocks) >> ilog2(zone_blocks);
 
 	/* READ16/WRITE16 is mandatory for ZBC disks */
-- 
2.17.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux