On qla4xxx, the driver needs to grab the drvr semaphore provided by the hardware,
prior to issuing a reset. This patches takes care of a couple of places
where it was not being done. In addition there is minor clean up.
The patch has been generated with reference to scsi-misc-2.6.git
Signed-off-by: David Somayajulu <david.somayajulu@xxxxxxxxxx>
---
drivers/scsi/qla4xxx/ql4_glbl.h | 1 +
drivers/scsi/qla4xxx/ql4_init.c | 2 +-
drivers/scsi/qla4xxx/ql4_os.c | 42 ++++++++++--------------------------
drivers/scsi/qla4xxx/ql4_version.h | 7 +-----
4 files changed, 15 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 2c803ed..79661c1 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -8,6 +8,7 @@
#ifndef __QLA4x_GBL_H
#define __QLA4x_GBL_H
+int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a);
int qla4xxx_send_tgts(struct scsi_qla_host *ha, char *ip, uint16_t port);
int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb);
int qla4xxx_initialize_adapter(struct scsi_qla_host * ha,
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index bb3a1c1..9e81b81 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -978,7 +978,7 @@ static int qla4xxx_start_firmware_from_f
return status;
}
-static int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a)
+int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a)
{
#define QL4_LOCK_DRVR_WAIT 300
#define QL4_LOCK_DRVR_SLEEP 100
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 178fcdd..61f61d5 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -919,18 +919,11 @@ static int qla4xxx_recover_adapter(struc
if (status == QLA_SUCCESS) {
DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
ha->host_no, __func__));
- status = qla4xxx_soft_reset(ha);
- }
- /* FIXMEkaren: Do we want to keep interrupts enabled and process
- AENs after soft reset */
-
- /* If firmware (SOFT) reset failed, or if all outstanding
- * commands have not returned, then do a HARD reset.
- */
- if (status == QLA_ERROR) {
- DEBUG2(printk("scsi%ld: %s - Performing hard reset..\n",
- ha->host_no, __func__));
- status = qla4xxx_hard_reset(ha);
+ qla4xxx_flush_active_srbs(ha);
+ if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
+ status = qla4xxx_soft_reset(ha);
+ else
+ status = QLA_ERROR;
}
/* Flush any pending ddb changed AENs */
@@ -1016,13 +1009,9 @@ static void qla4xxx_do_dpc(void *data)
struct scsi_qla_host *ha = (struct scsi_qla_host *) data;
struct ddb_entry *ddb_entry, *dtemp;
- DEBUG2(printk("scsi%ld: %s: DPC handler waking up.\n",
- ha->host_no, __func__));
-
- DEBUG2(printk("scsi%ld: %s: ha->flags = 0x%08lx\n",
- ha->host_no, __func__, ha->flags));
- DEBUG2(printk("scsi%ld: %s: ha->dpc_flags = 0x%08lx\n",
- ha->host_no, __func__, ha->dpc_flags));
+ DEBUG2(printk("scsi%ld: %s: DPC handler waking up."
+ "flags = 0x%08lx, dpc_flags = 0x%08lx\n",
+ ha->host_no, __func__, ha->flags, ha->dpc_flags));
/* Initialization not yet finished. Don't do anything yet. */
if (!test_bit(AF_INIT_DONE, &ha->flags))
@@ -1032,16 +1021,8 @@ static void qla4xxx_do_dpc(void *data)
test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags)) {
- if (test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags))
- /*
- * dg 09/23 Never initialize ddb list
- * once we up and running
- * qla4xxx_recover_adapter(ha,
- * REBUILD_DDB_LIST);
- */
- qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST);
-
- if (test_bit(DPC_RESET_HA, &ha->dpc_flags))
+ if (test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) ||
+ test_bit(DPC_RESET_HA, &ha->dpc_flags))
qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST);
if (test_and_clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) {
@@ -1122,7 +1103,8 @@ static void qla4xxx_free_adapter(struct
destroy_workqueue(ha->dpc_thread);
/* Issue Soft Reset to put firmware in unknown state */
- qla4xxx_soft_reset(ha);
+ if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
+ qla4xxx_soft_reset(ha);
/* Remove timer thread, if present */
if (ha->timer_active)
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index b3fe7e6..d05048b 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,9 +5,4 @@
* See LICENSE.qla4xxx for copyright and licensing details.
*/
-#define QLA4XXX_DRIVER_VERSION "5.00.05b9-k"
-
-#define QL4_DRIVER_MAJOR_VER 5
-#define QL4_DRIVER_MINOR_VER 0
-#define QL4_DRIVER_PATCH_VER 5
-#define QL4_DRIVER_BETA_VER 9
+#define QLA4XXX_DRIVER_VERSION "5.00.06-k"
--
1.4.2.3
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
