[PATCH v3 06/18] megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Issue: Under certain conditions, controller goes in FAULT state after
IOC INIT fired to firmware. Such Fault can be recovered through controller
reset.

Fix: In driver probe context, if firmware fault is observed post IOC INIT,
driver would do controller reset followed by retry logic for IOC INIT
command.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
---
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index b8a5bbf..2e711b1 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -1009,6 +1009,7 @@ wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,
 {
 	int i;
 	struct megasas_header *frame_hdr = &cmd->frame->hdr;
+	u32 status_reg;
 
 	u32 msecs = seconds * 1000;
 
@@ -1018,6 +1019,12 @@ wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,
 	for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i += 20) {
 		rmb();
 		msleep(20);
+		if (!(i % 5000)) {
+			status_reg = instance->instancet->read_fw_status_reg(instance)
+					& MFI_STATE_MASK;
+			if (status_reg == MFI_STATE_FAULT)
+				break;
+		}
 	}
 
 	if (frame_hdr->cmd_status == MFI_STAT_INVALID_STATUS)
@@ -1720,6 +1727,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance)
 	struct fusion_context *fusion;
 	u32 scratch_pad_1;
 	int i = 0, count;
+	u32 status_reg;
 
 	fusion = instance->ctrl_context;
 
@@ -1802,8 +1810,21 @@ megasas_init_adapter_fusion(struct megasas_instance *instance)
 	if (megasas_alloc_cmds_fusion(instance))
 		goto fail_alloc_cmds;
 
-	if (megasas_ioc_init_fusion(instance))
-		goto fail_ioc_init;
+	if (megasas_ioc_init_fusion(instance)) {
+		status_reg = instance->instancet->read_fw_status_reg(instance);
+		if (((status_reg & MFI_STATE_MASK) == MFI_STATE_FAULT) &&
+		    (status_reg & MFI_RESET_ADAPTER)) {
+			/* Do a chip reset and then retry IOC INIT once */
+			if (megasas_adp_reset_wait_for_ready
+				(instance, true, 0) == FAILED)
+				goto fail_ioc_init;
+
+			if (megasas_ioc_init_fusion(instance))
+				goto fail_ioc_init;
+		} else {
+			goto fail_ioc_init;
+		}
+	}
 
 	megasas_display_intel_branding(instance);
 	if (megasas_get_ctrl_info(instance)) {
-- 
2.9.5




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux