[PATCH 0/3] Fix zone revalidation memory allocation failures

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series addresses a reccuring problem with zone revalidation
failures observed during extensive testing with memory constrained
system and device hot-plugging.

The problem source is failure to allocate large memory areas with
alloc_pages() or kmalloc() in blk_revalidate_disk_zones() to store the
disk array of zones (struct blk_zone) or in sd_zbc_report_zones() for
the report zones command reply buffer.

The solution proposed here is to:
1) limit the number of zones to be reported with a single report zones
command execution, and
2) Use vmalloc to allocate large-ish arrays and buffers in place of
alloc_pages() and kmalloc().

With these changes, tests do not show any zone revalidation failures
while not impacting the time taken for a disk initial zone inspection
during device scan.

Damien Le Moal (3):
  block: Allow mapping of vmalloc-ed buffers
  sd_zbc: Fix report zones buffer allocation
  block: Limit zone array allocation size

 block/bio.c            |  8 ++++-
 block/blk-zoned.c      | 29 +++++++---------
 drivers/scsi/sd_zbc.c  | 79 +++++++++++++++++++++++++++++++-----------
 include/linux/blkdev.h |  5 +++
 4 files changed, 84 insertions(+), 37 deletions(-)

-- 
2.21.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux