On 2019-06-19 5:42 a.m., Marc Gonzalez wrote:
On 18/06/2019 17:31, Douglas Gilbert wrote:
On 2019-06-18 3:29 a.m., Marc Gonzalez wrote:
Please note that I am _in no way_ suggesting that we remove any code.
I just think it might be time to stop forcing CONFIG_SCSI_PROC_FS into
every config, and instead require one to explicitly request the aging
feature (which makes CONFIG_SCSI_PROC_FS show up in a defconfig).
Maybe we could add CONFIG_SCSI_PROC_FS to arch/x86/configs/foo ?
(For which foo? In a separate patch or squashed with this one?)
Since current sg driver usage seems to depend more on SCSI_PROC_FS
being "y" than other parts of the SCSI subsystem then if
SCSI_PROC_FS is to default to "n" in the future then a new
CONFIG_SG_PROC_FS variable could be added.
If CONFIG_CHR_DEV_SG is "*" or "m" then default CONFIG_SG_PROC_FS
to "y"; if CONFIG_SCSI_PROC_FS is "y" then default CONFIG_SG_PROC_FS
to "y"; else default CONFIG_SG_PROC_FS to "n". Obviously the
sg driver would need to be changed to use CONFIG_SG_PROC_FS instead
of CONFIG_SCSI_PROC_FS .
I like your idea, and I think it might even be made slightly simpler.
I assume sg3_utils requires CHR_DEV_SG. Is it the case?
If so, we would just need to enable SCSI_PROC_FS when CHR_DEV_SG is enabled.
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 73bce9b6d037..642ca0e7d363 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -54,14 +54,12 @@ config SCSI_NETLINK
config SCSI_PROC_FS
bool "legacy /proc/scsi/ support"
depends on SCSI && PROC_FS
- default y
+ default CHR_DEV_SG
---help---
This option enables support for the various files in
/proc/scsi. In Linux 2.6 this has been superseded by
files in sysfs but many legacy applications rely on this.
- If unsure say Y.
-
comment "SCSI support type (disk, tape, CD-ROM)"
depends on SCSI
Would that work for you?
I checked that SCSI_PROC_FS=y whether CHR_DEV_SG=y or m
I can spin a v2, with a blurb about how sg3_utils relies on SCSI_PROC_FS.
Yes, but (see below) ...
Does that defeat the whole purpose of your proposal or could it be
seen as a partial step in that direction? What is the motivation
for this proposal?
The rationale was just to look for "special-purpose" options that are
enabled by default, and change the default wherever possible, as a
matter of uniformity.
BTW We still have the non-sg related 'cat /proc/scsi/scsi' usage
and 'cat /proc/scsi/device_info'. And I believe the latter one is
writable even though its permissions say otherwise.
Any relation between SG and BSG?
Only in the sense that writing to /proc/scsi/device_info changes the
way the SCSI mid-level handles the identified device. So that is
in common with, and hence the same relation as, sd, sr, st, ses, etc
have with the identified device (e.g. a specialized USB dongle).
Example of use of /proc/scsi/scsi
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Linux Model: scsi_debug Rev: 0188
Type: Direct-Access ANSI SCSI revision: 07
Host: scsi0 Channel: 00 Id: 00 Lun: 01
Vendor: Linux Model: scsi_debug Rev: 0188
Type: Direct-Access ANSI SCSI revision: 07
Host: scsi0 Channel: 00 Id: 00 Lun: 02
Vendor: Linux Model: scsi_debug Rev: 0188
Type: Direct-Access ANSI SCSI revision: 07
Which can be replaced by:
$ lsscsi
[0:0:0:0] disk Linux scsi_debug 0188 /dev/sda
[0:0:0:1] disk Linux scsi_debug 0188 /dev/sdb
[0:0:0:2] disk Linux scsi_debug 0188 /dev/sdc
[N:0:1:1] disk INTEL SSDPEKKF256G7L__1 /dev/nvme0n1
Or if one really likes the "classic" look:
$ lsscsi -c
Attached devices:
Host: scsi0 Channel: 00 Target: 00 Lun: 00
Vendor: Linux Model: scsi_debug Rev: 0188
Type: Direct-Access ANSI SCSI revision: 07
Host: scsi0 Channel: 00 Target: 00 Lun: 01
Vendor: Linux Model: scsi_debug Rev: 0188
Type: Direct-Access ANSI SCSI revision: 07
Host: scsi0 Channel: 00 Target: 00 Lun: 02
Vendor: Linux Model: scsi_debug Rev: 0188
Type: Direct-Access ANSI SCSI revision: 07
Now looking at /proc/scsi/device_info
IMO unless there is a replacement for /proc/scsi/device_info
then your patch should not go ahead . If it does, any reasonable
distro should override it.
$ cat /proc/scsi/device_info
'Aashima' 'IMAGERY 2400SP' 0x1
'CHINON' 'CD-ROM CDS-431' 0x1
'CHINON' 'CD-ROM CDS-535' 0x1
'DENON' 'DRD-25X' 0x1
...
'XYRATEX' 'RS' 0x240
'Zzyzx' 'RocketStor 500S' 0x40
'Zzyzx' 'RocketStor 2000' 0x40
That is a black (or quirks) list that can be added to by writing an
entry to /proc/scsi/device_info . So if a user has a device that needs
one of those quirks defined to stop their system locking up when a
device of that type is plugged in, and the distro or some app (say,
that needs that device) knows about that, then it would be sad if
/proc/scsi/device_info was missing due to the changed default that is
being proposed.
The word "legacy" *** is thrown around a bit too often. It is not
legacy if there is no replacement for that functionality.
Doug Gilbert
*** I'm assuming "aging feature" is a softer form of "legacy feature".
"Classic" may be going too far the other way from "aged" and
"legacy".
