[PATCH 01/18] megaraid_sas: Add 32 bit atomic descriptor support to AERO adapters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Aero adapters provides Atomic Request Descriptor as an alternative
method for posting an entry onto a request queue. The posting of an
Atomic Request Descriptor is an atomic operation, providing a safe
mechanism for multiple processors on the host to post requests without
synchronization. This Atomic Request Descriptor format is identical to
first 32 bits of Default Request Descriptor and uses only 32 bits.

If Aero adapters support Atomic descriptor, driver should use it for
posting IOs and DCMDs to firmware.

Signed-off-by: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@xxxxxxxxxxxx>
---
 drivers/scsi/megaraid/megaraid_sas.h        |  3 ++
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 45 +++++++++++++++++++++++------
 2 files changed, 39 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index e138d14..a08dd9c 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1600,6 +1600,8 @@ enum FW_BOOT_CONTEXT {
 
 #define MR_CAN_HANDLE_SYNC_CACHE_OFFSET		0X01000000
 
+#define MR_ATOMIC_DESCRIPTOR_SUPPORT_OFFSET	(1 << 24)
+
 #define MR_CAN_HANDLE_64_BIT_DMA_OFFSET		(1 << 25)
 
 #define MEGASAS_WATCHDOG_THREAD_INTERVAL	1000
@@ -2395,6 +2397,7 @@ struct megasas_instance {
 	struct dentry *raidmap_dump;
 #endif
 	u8 enable_fw_dev_list;
+	bool atomic_desc_support;
 };
 struct MR_LD_VF_MAP {
 	u32 size;
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 2edb082..d4c1ee57 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -277,21 +277,17 @@ inline void megasas_return_cmd_fusion(struct megasas_instance *instance,
 }
 
 /**
- * megasas_fire_cmd_fusion -	Sends command to the FW
- * @instance:			Adapter soft state
- * @req_desc:			64bit Request descriptor
- *
- * Perform PCI Write.
+ * megasas_write_64bit_req_desc -	PCI writes 64bit request descriptor
+ * @instance:				Adapter soft state
+ * @req_desc:				64bit Request descriptor
  */
-
 static void
-megasas_fire_cmd_fusion(struct megasas_instance *instance,
+megasas_write_64bit_req_desc(struct megasas_instance *instance,
 		union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc)
 {
 #if defined(writeq) && defined(CONFIG_64BIT)
 	u64 req_data = (((u64)le32_to_cpu(req_desc->u.high) << 32) |
 		le32_to_cpu(req_desc->u.low));
-
 	writeq(req_data, &instance->reg_set->inbound_low_queue_port);
 #else
 	unsigned long flags;
@@ -305,6 +301,25 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance,
 }
 
 /**
+ * megasas_fire_cmd_fusion -	Sends command to the FW
+ * @instance:			Adapter soft state
+ * @req_desc:			32bit or 64bit Request descriptor
+ *
+ * Perform PCI Write. AERO SERIES supports 32 bit Descriptor.
+ * Prior to AERO_SERIES support 64 bit Descriptor.
+ */
+static void
+megasas_fire_cmd_fusion(struct megasas_instance *instance,
+		union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc)
+{
+	if (instance->atomic_desc_support)
+		writel(le32_to_cpu(req_desc->u.low),
+			&instance->reg_set->inbound_single_queue_port);
+	else
+		megasas_write_64bit_req_desc(instance, req_desc);
+}
+
+/**
  * megasas_fusion_update_can_queue -	Do all Adapter Queue depth related calculations here
  * @instance:							Adapter soft state
  * fw_boot_context:						Whether this function called during probe or after OCR
@@ -1171,7 +1186,8 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 			break;
 	}
 
-	megasas_fire_cmd_fusion(instance, &req_desc);
+	/* For AERO also, IOC_INIT requires 64 bit descriptor write */
+	megasas_write_64bit_req_desc(instance, &req_desc);
 
 	wait_and_poll(instance, cmd, MFI_IO_TIMEOUT_SECS);
 
@@ -1181,6 +1197,17 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 		goto fail_fw_init;
 	}
 
+	if (instance->adapter_type >= AERO_SERIES) {
+		scratch_pad_1 = megasas_readl
+			(instance, &instance->reg_set->outbound_scratch_pad_1);
+
+		instance->atomic_desc_support =
+			(scratch_pad_1 & MR_ATOMIC_DESCRIPTOR_SUPPORT_OFFSET) ? 1 : 0;
+
+		dev_info(&instance->pdev->dev, "FW supports atomic descriptor\t: %s\n",
+			instance->atomic_desc_support ? "Yes" : "No");
+	}
+
 	return 0;
 
 fail_fw_init:
-- 
2.9.5




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux