PATCH 3/11
This patch removes #define NR_CMDS and replaces it w/hba[i]->nr_cmds. Most
Smart Array controllers can support up to 1024 commands but the E200 family
can only support 128. To prevent annoying "fifo full" messages we define
nr_cmds on a per controller basis by adding it the product table.
Please consider this for inclusion.
Thanks,
mikem
Signed-off-by: Mike Miller <mike.miller@xxxxxx>
cciss.c | 74 ++++++++++++++++++++++++++++++++--------------------------------
cciss.h | 2 +
2 files changed, 40 insertions(+), 36 deletions(-)
--------------------------------------------------------------------------------
diff -urNp linux-2.6-p00002/drivers/block/cciss.c linux-2.6/drivers/block/cciss.c
--- linux-2.6-p00002/drivers/block/cciss.c 2006-10-31 14:52:09.000000000 -0600
+++ linux-2.6/drivers/block/cciss.c 2006-10-31 15:05:49.000000000 -0600
@@ -93,28 +93,29 @@ MODULE_DEVICE_TABLE(pci, cciss_pci_devic
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
* access = Address of the struct of function pointers
+ * nr_cmds = Number of commands supported by controller
*/
static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access},
- {0x40800E11, "Smart Array 5i", &SA5B_access},
- {0x40820E11, "Smart Array 532", &SA5B_access},
- {0x40830E11, "Smart Array 5312", &SA5B_access},
- {0x409A0E11, "Smart Array 641", &SA5_access},
- {0x409B0E11, "Smart Array 642", &SA5_access},
- {0x409C0E11, "Smart Array 6400", &SA5_access},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
- {0x40910E11, "Smart Array 6i", &SA5_access},
- {0x3225103C, "Smart Array P600", &SA5_access},
- {0x3223103C, "Smart Array P800", &SA5_access},
- {0x3234103C, "Smart Array P400", &SA5_access},
- {0x3235103C, "Smart Array P400i", &SA5_access},
- {0x3211103C, "Smart Array E200i", &SA5_access},
- {0x3212103C, "Smart Array E200", &SA5_access},
- {0x3213103C, "Smart Array E200i", &SA5_access},
- {0x3214103C, "Smart Array E200i", &SA5_access},
- {0x3215103C, "Smart Array E200i", &SA5_access},
- {0x3233103C, "Smart Array E500", &SA5_access},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access},
+ {0x40700E11, "Smart Array 5300", &SA5_access, 512},
+ {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
+ {0x40820E11, "Smart Array 532", &SA5B_access, 512},
+ {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
+ {0x409A0E11, "Smart Array 641", &SA5_access, 512},
+ {0x409B0E11, "Smart Array 642", &SA5_access, 512},
+ {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
+ {0x40910E11, "Smart Array 6i", &SA5_access, 512},
+ {0x3225103C, "Smart Array P600", &SA5_access, 512},
+ {0x3223103C, "Smart Array P800", &SA5_access, 512},
+ {0x3234103C, "Smart Array P400", &SA5_access, 512},
+ {0x3235103C, "Smart Array P400i", &SA5_access, 512},
+ {0x3211103C, "Smart Array E200i", &SA5_access, 120},
+ {0x3212103C, "Smart Array E200", &SA5_access, 120},
+ {0x3213103C, "Smart Array E200i", &SA5_access, 120},
+ {0x3214103C, "Smart Array E200i", &SA5_access, 120},
+ {0x3215103C, "Smart Array E200i", &SA5_access, 120},
+ {0x3233103C, "Smart Array E500", &SA5_access, 512},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
@@ -125,7 +126,6 @@ static struct board_type products[] = {
#define MAX_CMD_RETRIES 3
#define READ_AHEAD 1024
-#define NR_CMDS 384 /* #commands that can be outstanding */
#define MAX_CTLR 32
/* Originally cciss driver only supports 8 major numbers */
@@ -404,8 +404,8 @@ static CommandList_struct *cmd_alloc(ctl
} else { /* get it out of the controllers pool */
do {
- i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS);
- if (i == NR_CMDS)
+ i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
+ if (i == h->nr_cmds)
return NULL;
} while (test_and_set_bit
(i & (BITS_PER_LONG - 1),
@@ -1247,7 +1247,7 @@ static void cciss_check_queues(ctlr_info
* in case the interrupt we serviced was from an ioctl and did not
* free any new commands.
*/
- if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
+ if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds)
return;
/* We have room on the queue for more commands. Now we need to queue
@@ -1266,7 +1266,7 @@ static void cciss_check_queues(ctlr_info
/* check to see if we have maxed out the number of commands
* that can be placed on the queue.
*/
- if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) {
+ if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) {
if (curr_queue == start_queue) {
h->next_to_run =
(start_queue + 1) % (h->highest_lun + 1);
@@ -2134,7 +2134,7 @@ static int add_sendcmd_reject(__u8 cmd,
/* We've sent down an abort or reset, but something else
has completed */
- if (srl->ncompletions >= (NR_CMDS + 2)) {
+ if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
/* Uh oh. No room to save it for later... */
printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
"reject list overflow, command lost!\n", ctlr);
@@ -2671,7 +2671,7 @@ static irqreturn_t do_cciss_intr(int irq
a1 = a;
if ((a & 0x04)) {
a2 = (a >> 3);
- if (a2 >= NR_CMDS) {
+ if (a2 >= h->nr_cmds) {
printk(KERN_WARNING
"cciss: controller cciss%d failed, stopping.\n",
h->ctlr);
@@ -2954,6 +2954,7 @@ static int cciss_pci_init(ctlr_info_t *c
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
+ c->nr_cmds = products[i].nr_cmds;
break;
}
}
@@ -2973,6 +2974,7 @@ static int cciss_pci_init(ctlr_info_t *c
if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
c->product_name = products[i-1].product_name;
c->access = *(products[i-1].access);
+ c->nr_cmds = products[i-1].nr_cmds;
printk(KERN_WARNING "cciss: This is an unknown "
"Smart Array controller.\n"
"cciss: Please update to the latest driver "
@@ -3280,15 +3282,15 @@ static int __devinit cciss_init_one(stru
hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
hba[i]->cmd_pool_bits =
- kmalloc(((NR_CMDS + BITS_PER_LONG -
+ kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
hba[i]->cmd_pool = (CommandList_struct *)
pci_alloc_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(CommandList_struct),
+ hba[i]->nr_cmds * sizeof(CommandList_struct),
&(hba[i]->cmd_pool_dhandle));
hba[i]->errinfo_pool = (ErrorInfo_struct *)
pci_alloc_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(ErrorInfo_struct),
+ hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
&(hba[i]->errinfo_pool_dhandle));
if ((hba[i]->cmd_pool_bits == NULL)
|| (hba[i]->cmd_pool == NULL)
@@ -3299,7 +3301,7 @@ static int __devinit cciss_init_one(stru
#ifdef CONFIG_CISS_SCSI_TAPE
hba[i]->scsi_rejects.complete =
kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
- (NR_CMDS + 5), GFP_KERNEL);
+ (hba[i]->nr_cmds + 5), GFP_KERNEL);
if (hba[i]->scsi_rejects.complete == NULL) {
printk(KERN_ERR "cciss: out of memory");
goto clean4;
@@ -3313,7 +3315,7 @@ static int __devinit cciss_init_one(stru
/* command and error info recs zeroed out before
they are used */
memset(hba[i]->cmd_pool_bits, 0,
- ((NR_CMDS + BITS_PER_LONG -
+ ((hba[i]->nr_cmds + BITS_PER_LONG -
1) / BITS_PER_LONG) * sizeof(unsigned long));
#ifdef CCISS_DEBUG
@@ -3382,11 +3384,11 @@ static int __devinit cciss_init_one(stru
kfree(hba[i]->cmd_pool_bits);
if (hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(CommandList_struct),
+ hba[i]->nr_cmds * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
if (hba[i]->errinfo_pool)
pci_free_consistent(hba[i]->pdev,
- NR_CMDS * sizeof(ErrorInfo_struct),
+ hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
@@ -3453,9 +3455,9 @@ static void __devexit cciss_remove_one(s
}
}
- pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
+ pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
- pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(ErrorInfo_struct),
+ pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
#ifdef CONFIG_CISS_SCSI_TAPE
diff -urNp linux-2.6-p00002/drivers/block/cciss.h linux-2.6/drivers/block/cciss.h
--- linux-2.6-p00002/drivers/block/cciss.h 2006-10-31 14:31:05.000000000 -0600
+++ linux-2.6/drivers/block/cciss.h 2006-10-31 14:57:27.000000000 -0600
@@ -60,6 +60,7 @@ struct ctlr_info
__u32 board_id;
void __iomem *vaddr;
unsigned long paddr;
+ int nr_cmds; /* Number of commands allowed on this controller */
CfgTable_struct __iomem *cfgtable;
int interrupts_enabled;
int major;
@@ -282,6 +283,7 @@ struct board_type {
__u32 board_id;
char *product_name;
struct access_method *access;
+ int nr_cmds; /* Max cmds this kind of ctlr can handle. */
};
#define CCISS_LOCK(i) (&hba[i]->lock)
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
