[PATCH v2 2/2] qedi: Adjust termination and offload ramrod timers.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Whenever offload ramrod is issued, firmware wants driver
to wait for max 5 sec, otherwise driver can initiate
further corrective action. Similarly, when termination
ramrod is issued, irrespective of abortive or non-abortive
termination driver should wait for 60 sec * max TCP-RT
timeout.

Signed-off-by: Manish Rangankar <mrangankar@xxxxxxxxxxx>
---
 drivers/scsi/qedi/qedi_iscsi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index bf371e7..3032bfc 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -993,10 +993,11 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 	struct iscsi_conn *conn = NULL;
 	struct qedi_ctx *qedi;
 	int ret = 0;
-	int wait_delay = 20 * HZ;
+	int wait_delay;
 	int abrt_conn = 0;
 	int count = 10;
 
+	wait_delay = 60 * HZ + DEF_MAX_RT_TIME;
 	qedi_ep = ep->dd_data;
 	qedi = qedi_ep->qedi;
 
@@ -1166,7 +1167,7 @@ static void qedi_offload_work(struct work_struct *work)
 	struct qedi_endpoint *qedi_ep =
 		container_of(work, struct qedi_endpoint, offload_work);
 	struct qedi_ctx *qedi;
-	int wait_delay = 20 * HZ;
+	int wait_delay = 5 * HZ;
 	int ret;
 
 	qedi = qedi_ep->qedi;
-- 
1.8.3.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux