[RFC v2 11/11] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the OPP tables for DSI and MDP based on the perf state/clk
requirements, and add the power-domains property to specify the
scalable power domain.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 59 ++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index a3af4a1757b4..675954fde391 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1857,6 +1857,59 @@
 			#reset-cells = <1>;
 		};
 
+		mdp_opp_table: mdp-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-171428571 {
+				opp-hz = /bits/ 64 <171428571>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-344000000 {
+				opp-hz = /bits/ 64 <344000000>;
+				required-opps = <&rpmhpd_opp_svs_l1>;
+			};
+
+			opp-430000000 {
+				opp-hz = /bits/ 64 <430000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
+		dsi_opp_table: dsi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-180000000 {
+				opp-hz = /bits/ 64 <180000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-275000000 {
+				opp-hz = /bits/ 64 <275000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-328580000 {
+				opp-hz = /bits/ 64 <328580000>;
+				required-opps = <&rpmhpd_opp_svs_l1>;
+			};
+
+			opp-358000000 {
+				opp-hz = /bits/ 64 <358000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sdm845-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -1901,6 +1954,8 @@
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				assigned-clock-rates = <300000000>,
 						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@@ -1947,6 +2002,8 @@
 					      "core",
 					      "iface",
 					      "bus";
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi0_phy>;
 				phy-names = "dsi";
@@ -2013,6 +2070,8 @@
 					      "core",
 					      "iface",
 					      "bus";
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi1_phy>;
 				phy-names = "dsi";
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux