[RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On some qualcomm platforms DPU needs to express a perforamnce state
requirement on a power domain depennding on the clock rates.
Use OPP table from DT to register with OPP framework and use
dev_pm_opp_set_rate() to set the clk/perf state.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 7 ++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 9 +++++++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 9f20f397f77d..db21a86b242b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -15,6 +15,7 @@
 #include <linux/debugfs.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
+#include <linux/pm_opp.h>
 #include <linux/sort.h>
 #include <linux/clk.h>
 #include <linux/bitmap.h>
@@ -298,7 +299,11 @@ static int _dpu_core_perf_set_core_clk_rate(struct dpu_kms *kms, u64 rate)
 		rate = core_clk->max_rate;
 
 	core_clk->rate = rate;
-	return msm_dss_clk_set_rate(core_clk, 1);
+
+	if (dev_pm_opp_get_opp_table(&kms->pdev->dev))
+		return dev_pm_opp_set_rate(&kms->pdev->dev, core_clk->rate);
+	else
+		return msm_dss_clk_set_rate(core_clk, 1);
 }
 
 static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 885bf88afa3e..684bd6982aaf 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -22,6 +22,7 @@
 #include <linux/debugfs.h>
 #include <linux/of_irq.h>
 #include <linux/dma-buf.h>
+#include <linux/pm_opp.h>
 
 #include "msm_drv.h"
 #include "msm_mmu.h"
@@ -1014,6 +1015,12 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	if (!dpu_kms)
 		return -ENOMEM;
 
+	dev_pm_opp_set_clkname(dev, "core");
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret)
+		dev_err(dev, "failed to init OPP table: %d\n", ret);
+
 	mp = &dpu_kms->mp;
 	ret = msm_dss_parse_clock(pdev, mp);
 	if (ret) {
@@ -1040,6 +1047,7 @@ static void dpu_unbind(struct device *dev, struct device *master, void *data)
 	struct dpu_kms *dpu_kms = platform_get_drvdata(pdev);
 	struct dss_module_power *mp = &dpu_kms->mp;
 
+	dev_pm_opp_of_remove_table(dev);
 	msm_dss_put_clk(mp->clk_config, mp->num_clk);
 	devm_kfree(&pdev->dev, mp->clk_config);
 	mp->num_clk = 0;
@@ -1078,6 +1086,7 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev)
 		return rc;
 	}
 
+	dev_pm_opp_set_rate(dev, 0);
 	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
 	if (rc)
 		DPU_ERROR("clock disable failed rc:%d\n", rc);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux