The driver is currently reporting the firmware revision not the actual
boot bios version in FDMI data.
Modify the driver to obtain the boot bios version from the
adapter and use that data in the FMDI data sent to the switch.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc.h | 1 +
drivers/scsi/lpfc/lpfc_ct.c | 3 +-
drivers/scsi/lpfc/lpfc_sli.c | 85 +++++++++++++++++++++++++++++++++++---------
3 files changed, 71 insertions(+), 18 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 41d849f283f6..aafcffaa25f7 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -942,6 +942,7 @@ struct lpfc_hba {
int brd_no; /* FC board number */
char SerialNumber[32]; /* adapter Serial Number */
char OptionROMVersion[32]; /* adapter BIOS / Fcode version */
+ char BIOSVersion[16]; /* Boot BIOS version */
char ModelDesc[256]; /* Model Description */
char ModelName[80]; /* Model Name */
char ProgramType[256]; /* Program Type */
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index c58cff60912e..713f1f070c15 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -2304,7 +2304,8 @@ lpfc_fdmi_hba_attr_bios_ver(struct lpfc_vport *vport,
ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
memset(ae, 0, 256);
- lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
+ strlcat(ae->un.AttrString, phba->BIOSVersion,
+ sizeof(ae->un.AttrString));
len = strnlen(ae->un.AttrString,
sizeof(ae->un.AttrString));
len += (len & 3) ? (4 - (len & 3)) : 4;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 0963f81f2a3f..2b130f7bcc97 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -5402,7 +5402,7 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
}
/**
- * lpfc_sli4_retrieve_pport_name - Retrieve SLI4 device physical port name
+ * lpfc_sli4_get_ctl_attr - Retrieve SLI4 device controller attributes
* @phba: pointer to lpfc hba data structure.
*
* This routine retrieves SLI4 device physical port name this PCI function
@@ -5410,40 +5410,30 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
*
* Return codes
* 0 - successful
- * otherwise - failed to retrieve physical port name
+ * otherwise - failed to retrieve controller attributes
**/
static int
-lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba)
+lpfc_sli4_get_ctl_attr(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *mboxq;
struct lpfc_mbx_get_cntl_attributes *mbx_cntl_attr;
struct lpfc_controller_attribute *cntl_attr;
- struct lpfc_mbx_get_port_name *get_port_name;
void *virtaddr = NULL;
uint32_t alloclen, reqlen;
uint32_t shdr_status, shdr_add_status;
union lpfc_sli4_cfg_shdr *shdr;
- char cport_name = 0;
int rc;
- /* We assume nothing at this point */
- phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL;
- phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_NON;
-
mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq)
return -ENOMEM;
- /* obtain link type and link number via READ_CONFIG */
- phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL;
- lpfc_sli4_read_config(phba);
- if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL)
- goto retrieve_ppname;
- /* obtain link type and link number via COMMON_GET_CNTL_ATTRIBUTES */
+ /* Send COMMON_GET_CNTL_ATTRIBUTES mbox cmd */
reqlen = sizeof(struct lpfc_mbx_get_cntl_attributes);
alloclen = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES, reqlen,
LPFC_SLI4_MBX_NEMBED);
+
if (alloclen < reqlen) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"3084 Allocated DMA memory size (%d) is "
@@ -5469,16 +5459,71 @@ lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba)
rc = -ENXIO;
goto out_free_mboxq;
}
+
cntl_attr = &mbx_cntl_attr->cntl_attr;
phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
phba->sli4_hba.lnk_info.lnk_tp =
bf_get(lpfc_cntl_attr_lnk_type, cntl_attr);
phba->sli4_hba.lnk_info.lnk_no =
bf_get(lpfc_cntl_attr_lnk_numb, cntl_attr);
+
+ memset(phba->BIOSVersion, 0, sizeof(phba->BIOSVersion));
+ strlcat(phba->BIOSVersion, (char *)cntl_attr->bios_ver_str,
+ sizeof(phba->BIOSVersion));
+
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "3086 lnk_type:%d, lnk_numb:%d\n",
+ "3086 lnk_type:%d, lnk_numb:%d, bios_ver:%s\n",
phba->sli4_hba.lnk_info.lnk_tp,
- phba->sli4_hba.lnk_info.lnk_no);
+ phba->sli4_hba.lnk_info.lnk_no,
+ phba->BIOSVersion);
+out_free_mboxq:
+ if (rc != MBX_TIMEOUT) {
+ if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ else
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_retrieve_pport_name - Retrieve SLI4 device physical port name
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine retrieves SLI4 device physical port name this PCI function
+ * is attached to.
+ *
+ * Return codes
+ * 0 - successful
+ * otherwise - failed to retrieve physical port name
+ **/
+static int
+lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_get_port_name *get_port_name;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+ char cport_name = 0;
+ int rc;
+
+ /* We assume nothing at this point */
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL;
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_NON;
+
+ mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+ /* obtain link type and link number via READ_CONFIG */
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL;
+ lpfc_sli4_read_config(phba);
+ if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL)
+ goto retrieve_ppname;
+
+ /* obtain link type and link number via COMMON_GET_CNTL_ATTRIBUTES */
+ rc = lpfc_sli4_get_ctl_attr(phba);
+ if (rc)
+ goto out_free_mboxq;
retrieve_ppname:
lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
@@ -7258,6 +7303,12 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
"3080 Successful retrieving SLI4 device "
"physical port name: %s.\n", phba->Port);
+ rc = lpfc_sli4_get_ctl_attr(phba);
+ if (!rc)
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "8351 Successful retrieving SLI4 device "
+ "CTL ATTR\n");
+
/*
* Evaluate the read rev and vpd data. Populate the driver
* state with the results. If this routine fails, the failure
--
2.13.7
