From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx> For internal IO and SMP IO, there is a time-out timer for them. In the timer handler, it checks whether IO is done according to the flag task->task_state_lock. There is an issue which may cause system suspended: internal IO or SMP IO is sent, but at that time because of hardware exception (such as inject 2Bit ECC error), so IO is not completed and also not timeout. But, at that time, the SAS controller reset occurs to recover system. It will release the resource and set the status of IO to be SAS_TASK_STATE_DONE, so when IO timeout, it will never complete the completion of IO and wait for ever. [ 729.123632] Call trace: [ 729.126791] [<ffff00000808655c>] __switch_to+0x94/0xa8 [ 729.133106] [<ffff000008d96e98>] __schedule+0x1e8/0x7fc [ 729.138975] [<ffff000008d974e0>] schedule+0x34/0x8c [ 729.144401] [<ffff000008d9b000>] schedule_timeout+0x1d8/0x3cc [ 729.150690] [<ffff000008d98218>] wait_for_common+0xdc/0x1a0 [ 729.157101] [<ffff000008d98304>] wait_for_completion+0x28/0x34 [ 729.165973] [<ffff000000dcefb4>] hisi_sas_internal_task_abort+0x2a0/0x424 [hisi_sas_test_main] [ 729.176447] [<ffff000000dd18f4>] hisi_sas_abort_task+0x244/0x2d8 [hisi_sas_test_main] [ 729.185258] [<ffff000008971714>] sas_eh_handle_sas_errors+0x1c8/0x7b8 [ 729.192391] [<ffff000008972774>] sas_scsi_recover_host+0x130/0x398 [ 729.199237] [<ffff00000894d8a8>] scsi_error_handler+0x148/0x5c0 [ 729.206009] [<ffff0000080f4118>] kthread+0x10c/0x138 [ 729.211563] [<ffff0000080855dc>] ret_from_fork+0x10/0x18 To solve the issue, callback function task_done of those IOs need to be called when on SAS controller reset. Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx> Signed-off-by: John Garry <john.garry@xxxxxxxxxx> --- drivers/scsi/hisi_sas/hisi_sas_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index 923296653ed7..dd03dcbd3786 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -980,7 +980,8 @@ static void hisi_sas_do_release_task(struct hisi_hba *hisi_hba, struct sas_task spin_lock_irqsave(&task->task_state_lock, flags); task->task_state_flags &= ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR); - task->task_state_flags |= SAS_TASK_STATE_DONE; + if (!slot->is_internal && task->task_proto != SAS_PROTOCOL_SMP) + task->task_state_flags |= SAS_TASK_STATE_DONE; spin_unlock_irqrestore(&task->task_state_lock, flags); } -- 2.17.1
