From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
ufshcd_get_pwr_dev_param is for vendors to decide finally
agreed attributes for power mode change if vendors define
their host capability in struct ufs_dev_params.
This api is using by both ufs-qcom and ufs-hisi now and
will also be used in ufs-mediatek. Simply re-factor it
and then evevry vendors can reuse it.
Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd-pltfrm.c | 98 ++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshcd-pltfrm.h | 21 +++++++
2 files changed, 119 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 895a9b5ac989..508c561c9a62 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -39,6 +39,7 @@
#include "ufshcd.h"
#include "ufshcd-pltfrm.h"
+#include "unipro.h"
#define UFSHCD_DEFAULT_LANES_PER_DIRECTION 2
@@ -289,6 +290,103 @@ static void ufshcd_init_lanes_per_dir(struct ufs_hba *hba)
}
}
+/**
+ * ufshcd_get_pwr_dev_param - get finally agreed attributes for
+ * power mode change
+ * @pltfrm_param: pointer to platform parameters
+ * @dev_max: pointer to device attributes
+ * @agreed_pwr: returned agreed attributes
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_get_pwr_dev_param(struct ufs_dev_params *pltfrm_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr)
+{
+ int min_pltfrm_gear;
+ int min_dev_gear;
+ bool is_dev_sup_hs = false;
+ bool is_pltfrm_max_hs = false;
+
+ if (dev_max->pwr_rx == FAST_MODE)
+ is_dev_sup_hs = true;
+
+ if (pltfrm_param->desired_working_mode == UFS_HS_MODE) {
+ is_pltfrm_max_hs = true;
+ min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear,
+ pltfrm_param->hs_tx_gear);
+ } else {
+ min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear,
+ pltfrm_param->pwm_tx_gear);
+ }
+
+ /*
+ * device doesn't support HS but
+ * pltfrm_param->desired_working_mode is HS,
+ * thus device and pltfrm_param don't agree
+ */
+ if (!is_dev_sup_hs && is_pltfrm_max_hs) {
+ pr_info("%s: device doesn't support HS\n",
+ __func__);
+ return -ENOTSUPP;
+ } else if (is_dev_sup_hs && is_pltfrm_max_hs) {
+ /*
+ * since device supports HS, it supports FAST_MODE.
+ * since pltfrm_param->desired_working_mode is also HS
+ * then final decision (FAST/FASTAUTO) is done according
+ * to pltfrm_params as it is the restricting factor
+ */
+ agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs;
+ agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
+ } else {
+ /*
+ * here pltfrm_param->desired_working_mode is PWM.
+ * it doesn't matter whether device supports HS or PWM,
+ * in both cases pltfrm_param->desired_working_mode will
+ * determine the mode
+ */
+ agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm;
+ agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
+ }
+
+ /*
+ * we would like tx to work in the minimum number of lanes
+ * between device capability and vendor preferences.
+ * the same decision will be made for rx
+ */
+ agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
+ pltfrm_param->tx_lanes);
+ agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
+ pltfrm_param->rx_lanes);
+
+ /* device maximum gear is the minimum between device rx and tx gears */
+ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+ /*
+ * if both device capabilities and vendor pre-defined preferences are
+ * both HS or both PWM then set the minimum gear to be the chosen
+ * working gear.
+ * if one is PWM and one is HS then the one that is PWM get to decide
+ * what is the gear, as it is the one that also decided previously what
+ * pwr the device will be configured to.
+ */
+ if ((is_dev_sup_hs && is_pltfrm_max_hs) ||
+ (!is_dev_sup_hs && !is_pltfrm_max_hs)) {
+ agreed_pwr->gear_rx =
+ min_t(u32, min_dev_gear, min_pltfrm_gear);
+ } else if (!is_dev_sup_hs) {
+ agreed_pwr->gear_rx = min_dev_gear;
+ } else {
+ agreed_pwr->gear_rx = min_pltfrm_gear;
+ }
+ agreed_pwr->gear_tx = agreed_pwr->gear_rx;
+
+ agreed_pwr->hs_rate = pltfrm_param->hs_rate;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param);
+
/**
* ufshcd_pltfrm_init - probe routine of the driver
* @pdev: pointer to Platform device handle
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h
index df64c4180340..af85fb37e433 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.h
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.h
@@ -16,6 +16,27 @@
#include "ufshcd.h"
+#define UFS_PWR_MODE 1
+#define UFS_HS_MODE 2
+
+struct ufs_dev_params {
+ u32 pwm_rx_gear; /* pwm rx gear to work in */
+ u32 pwm_tx_gear; /* pwm tx gear to work in */
+ u32 hs_rx_gear; /* hs rx gear to work in */
+ u32 hs_tx_gear; /* hs tx gear to work in */
+ u32 rx_lanes; /* number of rx lanes */
+ u32 tx_lanes; /* number of tx lanes */
+ u32 rx_pwr_pwm; /* rx pwm working pwr */
+ u32 tx_pwr_pwm; /* tx pwm working pwr */
+ u32 rx_pwr_hs; /* rx hs working pwr */
+ u32 tx_pwr_hs; /* tx hs working pwr */
+ u32 hs_rate; /* rate A/B to work in HS */
+ u32 desired_working_mode;
+};
+
+int ufshcd_get_pwr_dev_param(struct ufs_dev_params *dev_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr);
int ufshcd_pltfrm_init(struct platform_device *pdev,
struct ufs_hba_variant_ops *vops);
void ufshcd_pltfrm_shutdown(struct platform_device *pdev);
--
2.18.0
