On Mon, 2019-02-18 at 12:37 +0300, Dan Carpenter wrote:
> On Sat, Feb 16, 2019 at 05:27:16PM +0100, Walter Harms wrote:
> > Am 16.02.2019 15:44, schrieb Colin King:
> > > From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> > >
> > > Currently m_sg->baseaddr_h (a 32 bit unsigned int) is being
> > > shifted by a
> > > total of 32 bits; this always produces a 0 result. Fix this by
> > > casting
> > > it to a dma_addr_t (a 64 bit unsigned int) before performing the
> > > shift.
> > >
> > > Detected by CoverityScan, CID#147270 ("Operands don't affect
> > > result")
> > >
> > > Fixes: f0c568a478f0 ("[SCSI] mvumi: Add Marvell UMI driver")
> > > Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> > > ---
> > > drivers/scsi/mvumi.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c
> > > index 36f64205ecfa..d3582accfd09 100644
> > > --- a/drivers/scsi/mvumi.c
> > > +++ b/drivers/scsi/mvumi.c
> > > @@ -313,7 +313,7 @@ static void mvumi_delete_internal_cmd(struct
> > > mvumi_hba
> > > *mhba,
> > > sgd_getsz(mhba, m_sg, size);
> > >
> > > phy_addr = (dma_addr_t) m_sg->baseaddr_l
> > > |
> > > - (dma_addr_t) ((m_sg->baseaddr_h
> > > << 16) << 16);
> > > + (((dma_addr_t) m_sg->baseaddr_h
> > > << 16) << 16);
> > >
> > > dma_free_coherent(&mhba->pdev->dev,
> > > size, cmd->data_buf,
> > >
> > > phy_addr);
> >
> > i would suggest to try a version with less casts to make it more
> > readable
> > like this untested suggestion:
> >
> > phy_addr =(m_sg->baseaddr_h << 16)| m_sg->baseaddr_l;
> > phy_addr <<= 16;
> >
>
> That would be a behavior change but it also might be a bugfix? Why
> doesn't the code just do:
>
> phy_addr = ((dma_addr_t)m_sg->baseaddr_h << 32) | m_sg-
> >baseaddr_l;
>
> (Probably they broke it up into two shifts to silence a GCC warning
> that the shift was wrong because of the missing cast?)
No because dma_addr_t can be 32 bits and the warning would then always
appear on some builds. The << 16 << 16 makes sure it doesn't.
James
