On Thu, 2006-10-19 at 01:52 -0400, Mike Christie wrote: > On Wed, 2006-10-18 at 15:32 -0700, Sean Bruno wrote: > > On Wed, 2006-10-18 at 15:24 -0700, Sean Bruno wrote: > > > I have had a tough time tracking this one down, however I can say for > > > certain that the 29320 is really having trouble if a LUN is power > > > cycled. > > > > > > I don't have access to a BUS analyzer right now, but here is my > > > regression. > > > > > > 1. Hook an external SCSI array/disk to a 29320. > > > 2. Power up SCSI array/disk > > > 3. Power up PC with 29320. > > > 4. When PC has booted, login and test device by creating a file > > > system, eg. mkfs /dev/sda (or whatever disk the array is called on > > > ur machine). > > > 5. Power cycle array/disk > > > 6. Retest device with another 'mkfs /dev/sda' ... panic/crash/lock-up > > > ensues. > > > > > > > > > > > > This did not happen in 2.6.15.7 but did appear in 2.6.16 and higher. > > > > Does this only occur with sg or is that the only way you got a trace? In > the original bug report you mentioned it occurring with mkfs, but the > bug oops is from a sg request. Is tdg_2 run while the mkfs is running? Snippets from 'dmesg' during step 6: scsi0: Someone reset channel A sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x28 0x0 0x0 0x0 0x0 0x80 0x0 0x0 0x80 0x0 Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x13 Mode 0x33 Card was paused INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9] KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47] SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 qinstart = 11319 qinfifonext = 11321 QINFIFO: 0x0 0x2 WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] 0 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] Total 2 Kernel Free SCB list: 1 3 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1 scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57 CDB 2a 0 0 80 9 e0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:4:0: Cmd aborted from QINFIFO sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x13 Mode 0x33 Card was paused INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9] KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47] SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 qinstart = 11319 qinfifonext = 11321 QINFIFO: 0x2 0x0 WAITING_TID_QUEUES: Pending list: 0 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] 2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] Total 2 Kernel Free SCB list: 1 3 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1 scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57 CDB 2a 0 0 80 9 e0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:4:0: Cmd aborted from QINFIFO sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x28 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x80 0x0 Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x13 Mode 0x33 Card was paused INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9] KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47] SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 qinstart = 11319 qinfifonext = 11320 QINFIFO: 0x2 WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] Total 1 Kernel Free SCB list: 0 1 3 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1 scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57 CDB 2a 0 0 80 9 e0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:4:0: Cmd aborted from QINFIFO sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x13 Mode 0x33 Card was paused INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9] KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47] SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 qinstart = 11319 qinfifonext = 11320 QINFIFO: 0x2 WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] Total 1 Kernel Free SCB list: 0 1 3 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1 scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57 CDB 2a 0 0 80 9 e0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:4:0: Cmd aborted from QINFIFO sd 0:0:4:0: Attempting to queue a TARGET RESET message:CDB: 0x28 0x0 0x0 0x0 0x0 0x80 0x0 0x0 0x80 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 1) scsi0: Device reset returning 0x2003 scsi0: bus reset still active sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x13 Mode 0x33 Card was paused INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9] KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47] SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 qinstart = 11319 qinfifonext = 11321 QINFIFO: 0x2 0x0 WAITING_TID_QUEUES: Pending list: 0 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] 2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] Total 2 Kernel Free SCB list: 1 3 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1 scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57 CDB 2a 0 0 80 9 e0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:4:0: Cmd aborted from QINFIFO sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x13 Mode 0x33 Card was paused INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9] KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47] SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 qinstart = 11319 qinfifonext = 11321 QINFIFO: 0x2 0x0 WAITING_TID_QUEUES: Pending list: 0 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] 2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47] Total 2 Kernel Free SCB list: 1 3 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1 scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57 CDB 2a 0 0 80 9 e0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:4:0: Cmd aborted from QINFIFO sd 0:0:4:0: scsi: Device offlined - not ready after error recovery sd 0:0:4:0: scsi: Device offlined - not ready after error recovery sd 0:0:4:0: SCSI error: return code = 0x00050000 end_request: I/O error, dev sda, sector 128 Buffer I/O error on device sda, logical block 128 Buffer I/O error on device sda, logical block 129 Buffer I/O error on device sda, logical block 130 Buffer I/O error on device sda, logical block 131 Buffer I/O error on device sda, logical block 132 Buffer I/O error on device sda, logical block 133 Buffer I/O error on device sda, logical block 134 Buffer I/O error on device sda, logical block 135 Buffer I/O error on device sda, logical block 136 Buffer I/O error on device sda, logical block 137 sd 0:0:4:0: SCSI error: return code = 0x00050000 end_request: I/O error, dev sda, sector 0 sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device sd 0:0:4:0: rejecting I/O to offline device Sean - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
