Re: Question on handling managed IRQs when hotplugging CPUs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/5/19 4:09 PM, John Garry wrote:
On 05/02/2019 14:52, Keith Busch wrote:
On Tue, Feb 05, 2019 at 05:24:11AM -0800, John Garry wrote:
On 04/02/2019 07:12, Hannes Reinecke wrote:

Hi Hannes,


So, as the user then has to wait for the system to declars 'ready for
CPU remove', why can't we just disable the SQ and wait for all I/O to
complete?
We can make it more fine-grained by just waiting on all outstanding I/O
on that SQ to complete, but waiting for all I/O should be good as an
initial try.
With that we wouldn't need to fiddle with driver internals, and could
make it pretty generic.

I don't fully understand this idea - specifically, at which layer would
we be waiting for all the IO to complete?

Whichever layer dispatched the IO to a CPU specific context should
be the one to wait for its completion. That should be blk-mq for most
block drivers.

For SCSI devices, unfortunately not all IO sent to the HW originates from blk-mq or any other single entity.

No, not as such.
But each IO sent to the HW requires a unique identifcation (ie a valid tag). And as the tagspace is managed by block-mq (minus management commands, but I'm working on that currently) we can easily figure out if the device is busy by checking for an empty tag map.

Should be doable for most modern HBAs.

Cheers,

Hannes
--
Dr. Hannes Reinecke		   Teamlead Storage & Networking
hare@xxxxxxx			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux