Re: [PATCH 16/41] scsi: imm: mark expected switch fall-throughs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Friendly ping (second one):

Who can ack/review/take this patch, please?

Martin: apparently, the only maintainers for this
driver are you and James.

Thanks
--
Gustavo

On 11/27/18 10:29 PM, Gustavo A. R. Silva wrote:
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that, in this particular case, I placed all the "Phase N - ..."
comments on the same line as its corresponding switch case. The same
way in which similar comments appear in drivers/scsi/ppa.c. This makes
it possible to place the "fall through" annotations at the bottom of
each switch case, which is what GCC is expecting to find.

Signed-off-by: Gustavo A. R. Silva <gustavo@xxxxxxxxxxxxxx>
---
  drivers/scsi/imm.c | 33 +++++++++++++++++----------------
  1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 8c6627bc8a39..629e0bc70d3e 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -796,21 +796,21 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
  			return 0;
  		}
  		return 1;	/* wait until imm_wakeup claims parport */
-		/* Phase 1 - Connected */
-	case 1:
+
+	case 1:		/* Phase 1 - Connected */
  		imm_connect(dev, CONNECT_EPP_MAYBE);
  		cmd->SCp.phase++;
+		/* fall through */
- /* Phase 2 - We are now talking to the scsi bus */
-	case 2:
+	case 2:		/* Phase 2 - We are now talking to the scsi bus */
  		if (!imm_select(dev, scmd_id(cmd))) {
  			imm_fail(dev, DID_NO_CONNECT);
  			return 0;
  		}
  		cmd->SCp.phase++;
+		/* fall through */
- /* Phase 3 - Ready to accept a command */
-	case 3:
+	case 3:		/* Phase 3 - Ready to accept a command */
  		w_ctr(ppb, 0x0c);
  		if (!(r_str(ppb) & 0x80))
  			return 1;
@@ -818,9 +818,9 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
  		if (!imm_send_command(cmd))
  			return 0;
  		cmd->SCp.phase++;
+		/* fall through */
- /* Phase 4 - Setup scatter/gather buffers */
-	case 4:
+	case 4:		/* Phase 4 - Setup scatter/gather buffers */
  		if (scsi_bufflen(cmd)) {
  			cmd->SCp.buffer = scsi_sglist(cmd);
  			cmd->SCp.this_residual = cmd->SCp.buffer->length;
@@ -834,8 +834,9 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
  		cmd->SCp.phase++;
  		if (cmd->SCp.this_residual & 0x01)
  			cmd->SCp.this_residual++;
-		/* Phase 5 - Pre-Data transfer stage */
-	case 5:
+		/* fall through */
+
+	case 5:		/* Phase 5 - Pre-Data transfer stage */
  		/* Spin lock for BUSY */
  		w_ctr(ppb, 0x0c);
  		if (!(r_str(ppb) & 0x80))
@@ -850,9 +851,9 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
  			if (imm_negotiate(dev))
  				return 0;
  		cmd->SCp.phase++;
+		/* fall through */
- /* Phase 6 - Data transfer stage */
-	case 6:
+	case 6:		/* Phase 6 - Data transfer stage */
  		/* Spin lock for BUSY */
  		w_ctr(ppb, 0x0c);
  		if (!(r_str(ppb) & 0x80))
@@ -866,9 +867,9 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
  				return 1;
  		}
  		cmd->SCp.phase++;
+		/* fall through */
- /* Phase 7 - Post data transfer stage */
-	case 7:
+	case 7:		/* Phase 7 - Post data transfer stage */
  		if ((dev->dp) && (dev->rd)) {
  			if ((dev->mode == IMM_NIBBLE) || (dev->mode == IMM_PS2)) {
  				w_ctr(ppb, 0x4);
@@ -878,9 +879,9 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
  			}
  		}
  		cmd->SCp.phase++;
+		/* fall through */
- /* Phase 8 - Read status/message */
-	case 8:
+	case 8:		/* Phase 8 - Read status/message */
  		/* Check for data overrun */
  		if (imm_wait(dev) != (unsigned char) 0xb8) {
  			imm_fail(dev, DID_ERROR);




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux