Early ISP2432 parts have a known hardware issue when coming
out of a D3 hot state. This issue can result in a hung PCIe
link. Recent firmwares contain a workaround whereby the
stop-firmware mailbox command prevents the ISP from entering
the D3 hot state.
In order to ensure that the workaround succeeded the driver
must verify that the stop-firmware mailbox command completes
successfully. In the event of a failure, the driver
attempts a shutdown-retry after resetting the ISP and
re-executing firmware.
Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_gbl.h | 1 +
drivers/scsi/qla2xxx/qla_init.c | 21 +++++++++++++++++++++
drivers/scsi/qla2xxx/qla_os.c | 6 +++---
3 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index b51ce8f..ca2f660 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -48,6 +48,7 @@ extern void qla2x00_update_fcport(scsi_q
extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *);
extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
+extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
/*
* Global Data in qla_os.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index d5e0a12..08cb5e3 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3948,3 +3948,24 @@ qla24xx_load_risc(scsi_qla_host_t *ha, u
fail_fw_integrity:
return QLA_FUNCTION_FAILED;
}
+
+void
+qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha)
+{
+ int ret, retries;
+
+ if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
+ return;
+
+ ret = qla2x00_stop_firmware(ha);
+ for (retries = 5; ret != QLA_SUCCESS && retries ; retries--) {
+ qla2x00_reset_chip(ha);
+ if (qla2x00_chip_diag(ha) != QLA_SUCCESS)
+ continue;
+ if (qla2x00_setup_chip(ha) != QLA_SUCCESS)
+ continue;
+ qla_printk(KERN_INFO, ha,
+ "Attempting retry of stop-firmware command...\n");
+ ret = qla2x00_stop_firmware(ha);
+ }
+}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 34b6eb7..54f561d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1712,8 +1712,10 @@ qla2x00_free_device(scsi_qla_host_t *ha)
if (ha->eft)
qla2x00_trace_control(ha, TC_DISABLE, 0, 0);
+ ha->flags.online = 0;
+
/* Stop currently executing firmware. */
- qla2x00_stop_firmware(ha);
+ qla2x00_try_to_stop_firmware(ha);
/* turn-off interrupts on the card */
if (ha->interrupts_on)
@@ -1721,8 +1723,6 @@ qla2x00_free_device(scsi_qla_host_t *ha)
qla2x00_mem_free(ha);
- ha->flags.online = 0;
-
/* Detach interrupts */
if (ha->host->irq)
free_irq(ha->host->irq, ha);
--
1.4.3.rc2.g23bed
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
