Re: [PATCH v8 01/25] scsi/atari_scsi: Don't select CONFIG_NVRAM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Michael Schmitz <schmitzmic@xxxxxxxxx> a écrit :

Hi Finn,

Am 29.12.2018 um 14:06 schrieb Finn Thain:
On Fri, 28 Dec 2018, LEROY Christophe wrote:
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 89f5154c40b6..99e5729d910d 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -755,9 +755,10 @@ static int __init atari_scsi_probe(struct
platform_device *pdev)
	if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize >= 0)
		atari_scsi_template.sg_tablesize = setup_sg_tablesize;

-	if (setup_hostid >= 0) {
+	if (setup_hostid >= 0)
		atari_scsi_template.this_id = setup_hostid & 7;
-	} else {
+#ifdef CONFIG_NVRAM
+	else

Such ifdefs should be avoided in C files.
It would be better to use

} else if (IS_ENABLED(CONFIG_NVRAM)) {


I don't like #ifdefs either. However, as the maintainer of this file, I am
okay with this one.

The old #ifdef CONFIG_NVRAM conditional compilation convention that gets
used here and under drivers/video/fbdev could probably be improved upon
but I consider this to be out-of-scope for this series, which is
complicated enough.

And as explained in the commit log, CONFIG_NVRAM=y and CONFIG_NVRAM=m are
treaded differently by drivers. Therefore, IS_ENABLED would be incorrect.

IS_BUILTIN(CONFIG_NVRAM) is probably what Christophe really meant to suggest.

Doesn't #ifdef means either y or m ? So the same as IS_ENABLED() ?

Christophe


Or (really going out on a limb here):

IS_BUILTIN(CONFIG_NVRAM) ||
( IS_MODULE(CONFIG_ATARI_SCSI) && IS_ENABLED(CONFIG_NVRAM) )

Not that I'd advocate that, for this series.

Cheers,

	Michael





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux