[PATCH 1/2] qla2xxx: Add protection mask module parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>

Allow user to selectively enable/disable DIF/DIX protection
capabilities mask.

Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_os.c | 36 ++++++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index f0ffb0e5c113..deb923058d08 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -285,6 +285,20 @@ MODULE_PARM_DESC(qla2xuseresexchforels,
 		 "Reserve 1/2 of emergency exchanges for ELS.\n"
 		 " 0 (default): disabled");
 
+int ql2xprotmask;
+module_param(ql2xprotmask, int, 0644);
+MODULE_PARM_DESC(ql2xprotmask,
+    "Override DIF/DIX protection capabilities mask\n"
+    "Default is 0 which sets protection mask based on capabilities "
+    "reported by HBA firmware.\n");
+
+int ql2xprotguard;
+module_param(ql2xprotguard, int, 0644);
+MODULE_PARM_DESC(ql2xprotguard, "Override choice of DIX checksum\n"
+    "  0 -- Let HBA firmware decide\n"
+    "  1 -- Force T10 CRC\n"
+    "  2 -- Force IP checksum\n");
+
 /*
  * SCSI host template entry points
  */
@@ -3355,13 +3369,16 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			    "Registering for DIF/DIX type 1 and 3 protection.\n");
 			if (ql2xenabledif == 1)
 				prot = SHOST_DIX_TYPE0_PROTECTION;
-			scsi_host_set_prot(host,
-			    prot | SHOST_DIF_TYPE1_PROTECTION
-			    | SHOST_DIF_TYPE2_PROTECTION
-			    | SHOST_DIF_TYPE3_PROTECTION
-			    | SHOST_DIX_TYPE1_PROTECTION
-			    | SHOST_DIX_TYPE2_PROTECTION
-			    | SHOST_DIX_TYPE3_PROTECTION);
+			if (ql2xprotmask)
+				scsi_host_set_prot(host, ql2xprotmask);
+			else
+				scsi_host_set_prot(host,
+				    prot | SHOST_DIF_TYPE1_PROTECTION
+				    | SHOST_DIF_TYPE2_PROTECTION
+				    | SHOST_DIF_TYPE3_PROTECTION
+				    | SHOST_DIX_TYPE1_PROTECTION
+				    | SHOST_DIX_TYPE2_PROTECTION
+				    | SHOST_DIX_TYPE3_PROTECTION);
 
 			guard = SHOST_DIX_GUARD_CRC;
 
@@ -3369,7 +3386,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			    (ql2xenabledif > 1 || IS_PI_DIFB_DIX0_CAPABLE(ha)))
 				guard |= SHOST_DIX_GUARD_IP;
 
-			scsi_host_set_guard(host, guard);
+			if (ql2xprotguard)
+				scsi_host_set_guard(host, ql2xprotguard);
+			else
+				scsi_host_set_guard(host, guard);
 		} else
 			base_vha->flags.difdix_supported = 0;
 	}
-- 
2.12.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux