[PATCH 13/20] smartpqi: check for null device pointers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mahesh Rajashekhara <mahesh.rajashekhara@xxxxxxxxxxxxx>

- wait on all outstanding I/O to complete before the device is removed.
- check for null device pointers in IO entry/completion functions.

Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Murthy Bhat <murthy.bhat@xxxxxxxxxxxxx>
Reviewed-by: Dave Carroll <david.carroll@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
 drivers/scsi/smartpqi/smartpqi.h      |    2 +
 drivers/scsi/smartpqi/smartpqi_init.c |   65 +++++++++++++++++++++++++++++++--
 2 files changed, 64 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index a39c324dedab..4f52b5be3693 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -862,6 +862,7 @@ struct pqi_scsi_dev {
 	u8	volume_offline : 1;
 	bool	aio_enabled;		/* only valid for physical disks */
 	bool	in_reset;
+	bool	in_remove;
 	bool	device_offline;
 	u8	vendor[8];		/* bytes 8-15 of inquiry data */
 	u8	model[16];		/* bytes 16-31 of inquiry data */
@@ -1063,6 +1064,7 @@ struct pqi_ctrl_info {
 	struct mutex	lun_reset_mutex;
 	bool		controller_online;
 	bool		block_requests;
+	bool		in_shutdown;
 	u8		inbound_spanning_supported : 1;
 	u8		outbound_spanning_supported : 1;
 	u8		pqi_mode_enabled : 1;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index c5640b379505..5f7ae5946ddc 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -74,6 +74,8 @@ static int pqi_aio_submit_io(struct pqi_ctrl_info *ctrl_info,
 	struct scsi_cmnd *scmd, u32 aio_handle, u8 *cdb,
 	unsigned int cdb_length, struct pqi_queue_group *queue_group,
 	struct pqi_encryption_info *encryption_info, bool raid_bypass);
+static int pqi_device_wait_for_pending_io(struct pqi_ctrl_info *ctrl_info,
+	struct pqi_scsi_dev *device, unsigned long timeout_secs);
 
 /* for flags argument to pqi_submit_raid_request_synchronous() */
 #define PQI_SYNC_FLAGS_INTERRUPTABLE	0x1
@@ -317,6 +319,17 @@ static inline bool pqi_device_in_reset(struct pqi_scsi_dev *device)
 	return device->in_reset;
 }
 
+static inline void pqi_device_remove_start(struct pqi_scsi_dev *device)
+{
+	device->in_remove = true;
+}
+
+static inline bool pqi_device_in_remove(struct pqi_ctrl_info *ctrl_info,
+					struct pqi_scsi_dev *device)
+{
+	return device->in_remove & !ctrl_info->in_shutdown;
+}
+
 static inline void pqi_schedule_rescan_worker_with_delay(
 	struct pqi_ctrl_info *ctrl_info, unsigned long delay)
 {
@@ -1487,9 +1500,24 @@ static int pqi_add_device(struct pqi_ctrl_info *ctrl_info,
 	return rc;
 }
 
+#define PQI_PENDING_IO_TIMEOUT_SECS	20
+
 static inline void pqi_remove_device(struct pqi_ctrl_info *ctrl_info,
 	struct pqi_scsi_dev *device)
 {
+	int rc;
+
+	pqi_device_remove_start(device);
+
+	rc = pqi_device_wait_for_pending_io(ctrl_info, device,
+		PQI_PENDING_IO_TIMEOUT_SECS);
+	if (rc)
+		dev_err(&ctrl_info->pci_dev->dev,
+			"scsi %d:%d:%d:%d removing device with %d outstanding commands\n",
+			ctrl_info->scsi_host->host_no, device->bus,
+			device->target, device->lun,
+			atomic_read(&device->scsi_cmds_outstanding));
+
 	if (pqi_is_logical_device(device))
 		scsi_remove_device(device->sdev);
 	else
@@ -5042,7 +5070,17 @@ void pqi_prep_for_scsi_done(struct scsi_cmnd *scmd)
 {
 	struct pqi_scsi_dev *device;
 
+	if (!scmd->device) {
+		set_host_byte(scmd, DID_NO_CONNECT);
+		return;
+	}
+
 	device = scmd->device->hostdata;
+	if (!device) {
+		set_host_byte(scmd, DID_NO_CONNECT);
+		return;
+	}
+
 	atomic_dec(&device->scsi_cmds_outstanding);
 }
 
@@ -5059,9 +5097,16 @@ static int pqi_scsi_queue_command(struct Scsi_Host *shost,
 	device = scmd->device->hostdata;
 	ctrl_info = shost_to_hba(shost);
 
+	if (!device) {
+		set_host_byte(scmd, DID_NO_CONNECT);
+		pqi_scsi_done(scmd);
+		return 0;
+	}
+
 	atomic_inc(&device->scsi_cmds_outstanding);
 
-	if (pqi_ctrl_offline(ctrl_info)) {
+	if (pqi_ctrl_offline(ctrl_info) || pqi_device_in_remove(ctrl_info,
+								device)) {
 		set_host_byte(scmd, DID_NO_CONNECT);
 		pqi_scsi_done(scmd);
 		return 0;
@@ -5214,12 +5259,23 @@ static void pqi_fail_io_queued_for_device(struct pqi_ctrl_info *ctrl_info,
 }
 
 static int pqi_device_wait_for_pending_io(struct pqi_ctrl_info *ctrl_info,
-	struct pqi_scsi_dev *device)
+	struct pqi_scsi_dev *device, unsigned long timeout_secs)
 {
+	unsigned long timeout;
+
+	timeout = (timeout_secs * HZ) + jiffies;
+
 	while (atomic_read(&device->scsi_cmds_outstanding)) {
 		pqi_check_ctrl_health(ctrl_info);
 		if (pqi_ctrl_offline(ctrl_info))
 			return -ENXIO;
+		if (timeout_secs != NO_TIMEOUT) {
+			if (time_after(jiffies, timeout)) {
+				dev_err(&ctrl_info->pci_dev->dev,
+					"timed out waiting for pending IO\n");
+				return -ETIMEDOUT;
+			}
+		}
 		usleep_range(1000, 2000);
 	}
 
@@ -5345,7 +5401,8 @@ static int pqi_device_reset(struct pqi_ctrl_info *ctrl_info,
 		msleep(PQI_LUN_RESET_RETRY_INTERVAL_MSECS);
 	}
 	if (rc == 0)
-		rc = pqi_device_wait_for_pending_io(ctrl_info, device);
+		rc = pqi_device_wait_for_pending_io(ctrl_info,
+			device, NO_TIMEOUT);
 
 	return rc == 0 ? SUCCESS : FAILED;
 }
@@ -7189,6 +7246,8 @@ static void pqi_pci_remove(struct pci_dev *pci_dev)
 	if (!ctrl_info)
 		return;
 
+	ctrl_info->in_shutdown = true;
+
 	pqi_remove_ctrl(ctrl_info);
 }
 




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux